ESC—問

Hi chings,
Any recommend for Short Course?
I am using HW XERUN-SCT-PRO. It is a sensed ESC but I can't install the firmware with turbo mode.

SCT PRO已係好好既esc.......sc專用4極摩打唔用turbo的

But the ESC has sensed plug.
When I use sensed 550 motor, playing after 10mins it is unstably acceleration.
After I unplug the sensed cable, it becomes normal
Is the ESC out of order?

macrossvf1a 發表於 2013-10-27 11:20
But the ESC has sensed plug.
When I use sensed 550 motor, playing after 10mins it is unstably accele ...

你用邊隻摩打 ???電幾多mah ???
set左幾多v cut電 ???

Marco明 發表於 2013-10-27 12:38
你用邊隻摩打 ???電幾多mah ???
set左幾多v cut電 ???

Hi ching
I am using Tenshock sensed motor 4000kv
LiPo 2c 5500mah-->LiPo 2s更正
Preset: 3.2v/cell cut 電
Thanks!!

macrossvf1a 發表於 2013-10-27 23:08
Hi ching
I am using Tenshock sensed motor 4000kv
LiPo 2c 5500mah

5500 mah玩10 mins肯定係cut電....所以比唔到油

Sorry, I have changed another pack of battery, same situation.
When I unplug the sensed cable, it becomes normal

macrossvf1a 發表於 2013-10-28 14:44
Sorry, I have changed another pack of battery, same situation.
When I unplug the sensed cable, it be ...

LiPo 2c 5500mah

得2c ???

玩10 mins cut電其實好正常......unplug the sensed cable可以行幾耐?

貓仙人 發表於 2013-10-28 15:42
玩10 mins cut電其實好正常......unplug the sensed cable可以行幾耐?

Hi Ching,

The main problem is not battery time duration.
The main problem is non-smooth accerelation when using sensed cable.
When I unplug the sensed cable, it become normal accerelation and battery time duration

試下換條感應線試下......

你用咗隻ESC幾耐?之前係咪正常？

First time to play, only 2-3 pack battery
I am going to reinstall the firmware again. Hope to have improvement

macrossvf1a 發表於 2013-10-28 17:09
First time to play, only 2-3 pack battery
I am going to reinstall the firmware again. Hope to have i ...

我都有相關問題試過。以下三樣，你要試.

1. 換有感線
2. restore firmware
3. 電 -　試用70c / 6800mah 或以上的電。

According to HW website there is comparibility issue for version 3.3 with Tenshock 4 or 6 pole motors.

Don't update the latest firmware or your ESC won't compatible to Tenshock motors.  I have the same issue before, please try to re-solder all the wires. It may be caused by bad soldering.

Sorry, duplicate post

Thanks chings. I have reinstall the firmware. Waiting for test drive on weekend.
想搵沙地泥地試車, 香港區有冇?

Cyberport park