1/8 inferno 油雞想改,變電車一問?

1/8 inferno 油雞想改,變電車, 請問有冇師兄知道那有conversion kit 買呢? 知前去紅星問過要訂及$1000+, 覺得有Ｄ貴,上RC mart 又 out of stock. 吳知師兄有冇改 inferno experience 可以教下小弟, 其實有冇其他車款 個 motor mount 可装上去呢?. 巳買了550 motor 想裝上去.

試吓去問“志落“！

hobby P*o 好似有套kit 出過.

可以看看ｏｋｈｏｂｂｙ　。。。。。　我有ｉｎｆｅｒｎｏ　ｎｅｏ改電　ｇｔ，，，，　

hhxhkuroro 發表於 2013-10-18 22:10
可以看看ｏｋｈｏｂｂｙ　。。。。。　我有ｉｎｆｅｒｎｏ　ｎｅｏ改電　ｇｔ，，，，　 ...

where is ok hobby?

買hobby pro 平D，之前在紅星買過

Tekno?

http://www.okhobby.com

thank for c hing information. check check sin.

淘寶2百幾 rmb

pppo1112 發表於 2013-10-23 01:35
淘寶2百幾 rmb

thx c hing information, my friend just give a used set.
Btw i what ask is 7.4v 2 cell is fast enough or 14.8 4 cell is better?

睇你魔打電變囉。4cell要用2000kv 以下魔打。。。4cell係喪但磨胎好勁。。

pppo1112 發表於 2013-10-23 01:43
睇你魔打電變囉。4cell要用2000kv 以下魔打。。。4cell係喪但磨胎好勁。。

thx c hing, can 2250 kv motor use 3 cell 11.1 v?

3cell 都ok 我都係咁玩

pppo1112 發表於 2013-10-23 01:51
3cell 都ok 我都係咁玩

thanks c hing information.

any c hing use toro ts 150a esc?

solid 發表於 2013-10-23 01:48
thx c hing, can 2250 kv motor use 3 cell 11.1 v?

Better to use 4s than 3s.  It's less hot for esc, motor and battery.

why? more cell should be higher Voltage. it should be more hot for the motor and esc.