Buggy配摩打ー問?????

可以用60A的電變及無刷5400KV的摩打??????

60A 大約支援 8.5T (4xxxKV)，5400KV 差唔多上到 6.5T，Buggy 行 3S 爆啲，應該仲實際過要隻高轉數摩打......

If 2 pole...ok gei.. (2s)

THX ALL!!!!

咁如果想部短卡係石仔地好飛同快，應點配摩打及電變！而電變要行到3 cell  11.4V的鋰電！請大家指教吓小弟。

If u can use 3s, then go lower kv to get more punch, 60A is decent if the rating is accurate...

For SCT , most people may suggest 100a and up esc, but if you run a lower kv motor with 3s, you will be fine.

Say hobbywing 60a ezrun, + a 2800kv motor with 3s will be good and cheap.

965 發表於 2014-4-4 03:34
If u can use 3s, then go lower kv to get more punch, 60A is decent if the rating is accurate...

For ...

Thx!!!我都覺得係，就係唔知點解啲ching成日都話要買百幾A的電變！

Again, depends how much you want to spend...  Higher Amp esc offer lower resistance .... Which is very important in the old day ... A 360A brushed esc may offer 2/3 second more run time vs a 180A brushed esc... But not as magnify today.
If you can only run 2s, and using a ~5000kv 4pole motor, then yes, u need a 100A plus esc...

965 發表於 2014-4-4 11:46
Again, depends how much you want to spend...  Higher Amp esc offer lower resistance .... Which is ve ...

如果用540摩打加有刷電變得唔得？因我有一個540摩打！

U mean brushed or brushless?

965 發表於 2014-4-5 02:45
U mean brushed or brushless?

有何分別？應該係有感電變！因個摩打係買田宮F350留下無用的。

F350唔係跟有刷咩?

bigmouthguy 發表於 2014-4-6 13:14
F350唔係跟有刷咩?

得正及負，係有刷定無刷？

有刷