請教各位師兄有關keyence exstraight 電變問題

請問keyence exstraight 係點樣set??係遙控方面要注意d咩咁呢??...唔該晒!!

因為小弟初次接觸keyence 電變,請各位師兄幫吓手.....thx

我都想知點set??.........唔該師兄!!

I just follow the instruction booklet..

but you need to be aware of the two alternating nob on the ESC to adjust brake and throttle parameters.

我冇o左說明書啞 ~~希望師兄可以詳細教吓我....唔該晒~~

睇下有無你地o個隻

http://hobby.keyence.co.jp/english/manual.html

唔該各位先~~ 但係仲味知SET.....

原帖由 beebee 於 2007-2-22 15:22 發表
唔該各位先~~ 但係仲味知SET.....

You can try this...although this is for the ESC A01, but i think its the same for Exstraight

原帖由 jpmontoya2 於 2007-2-23 14:10 發表



You can try this...although this is for the ESC A01, but i think its the same for Exstraight

setup到第9點之後好像沒set brake point


9............
10.  The LED will flash slower.
11.  Set the transmitter to "Brake point" (at 90%of full Brake) and press the set switch one.
12.  The setup is completed.

原帖由 stanley888 於 2007-2-23 14:47 發表


setup到第9點之後好像沒set brake point


9............
10.  The LED will flash slower.
11.  Set the transmitter to "Brake point" (at 90%of full Brake) and press the set swit ...

i thought step 11 is the brake point wor?

besides...EXstraight ESC has that small nob at the front of the panel which u can insert a small screw driver to adjsut the braking force ga

原帖由 jpmontoya2 於 2007-2-23 14:56 發表


i thought step 11 is the brake point wor?

besides...EXstraight ESC has that small nob at the front of the panel which u can insert a small screw driver to adjsut the braking force ga

http://hobby.keyence.co.jp/download/pdf/manu_exstraight.pdf

師兄你可以慘考下日文說明書。日文有叫set brake point，英文沒叫！可能攪錯了

原帖由 stanley888 於 2007-2-23 15:07 發表


http://hobby.keyence.co.jp/download/pdf/manu_exstraight.pdf

師兄你可以慘考下日文說明書。日文有叫set brake point，英文沒叫！可能攪錯了

Umm...the brake point in Keyence is meaning brake or what?

Because when i use my Exstraight, it workds perfectly fine wor~

See if other brother can help him~~

原帖由 jpmontoya2 於 2007-2-23 15:10 發表


Umm...the brake point in Keyence is meaning brake or what?

Because when i use my Exstraight, it workds perfectly fine wor~

See if other brother can help him~~

如果不set 個 最大的 brake point！那就沒了大細 brake! 那個 Brake adjustment function 是set 一開始個brake level ！但最大brake 的力度都是你之前setup時最大brake
point!

原帖由 jpmontoya2 於 2007-2-23 15:10 發表


Umm...the brake point in Keyence is meaning brake or what?

應該是講最大 Brake point.

多謝咁多位師兄指點...我想問多樣野...set-up後粒迫力led係味頂迫時會閃閃吓...??定係我做錯程序???................??