RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2233|回復: 13
打印 上一主題 下一主題
收起左側

Want to buy a M Car... M03 or M04?

[複製鏈接]
跳轉到指定樓層
1#
GigaRacer 發表於 2007-3-2 09:17:33 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Which one is more fun to play?  

M03/M03M

or  

M04

M04 come with what kinds of body?
2#
Tim 發表於 2007-3-2 10:42:42 | 只看該作者
M03 is easier to drive and easier to set up.

M04 requires better throttle control to drive fast and more time to get a good setup.

M03 has the most amount of bodies available, but nearly all of the M04 bodies will fit the M03 with some minor tweaks - I have an M03M with Alfa body

M04 has these bodies, Alfa, S2000, Z3, MX5 and now the Beetle.
3#
 樓主| GigaRacer 發表於 2007-3-2 15:14:39 | 只看該作者

回復 #2 Tim 的帖子

Alfa?  Any picture?

I am thinking to use it for TCS (Tamiya Race).  So, front wheel drive better than rear wheel drive??
4#
kaho0338 發表於 2007-3-2 15:20:22 | 只看該作者
原帖由 GigaRacer 於 2007-3-2 15:14 發表
Alfa?  Any picture?

I am thinking to use it for TCS (Tamiya Race).  So, front wheel drive better than rear wheel drive??


又冇話邊部特別好......set 得唔好, 揸得唔好乜都死...
只可以話你知m03 比m04 更易set, 更易揸....如果你m04 set 得好, 好勁的
5#
 樓主| GigaRacer 發表於 2007-3-2 15:39:36 | 只看該作者

回復 #4 kaho0338 的帖子

so, for a M03M, what do I need to change?
6#
kaho0338 發表於 2007-3-2 15:49:09 | 只看該作者
原帖由 GigaRacer 於 2007-3-2 15:39 發表
so, for a M03M, what do I need to change?


if for tamiya race.........just change bearing, Universal Shaft, damper, ball diff, f201 20 teeth (hard) ...that's it !
and all must be tamiya items

[ 本帖最後由 kaho0338 於 2007-3-2 15:55 編輯 ]
7#
 樓主| GigaRacer 發表於 2007-3-2 16:02:38 | 只看該作者

回復 #6 kaho0338 的帖子

what is f201?
8#
kaho0338 發表於 2007-3-2 16:12:37 | 只看該作者
原帖由 GigaRacer 於 2007-3-2 16:02 發表
what is f201?


F201 is a formula car from tamiya.....m03/m03m can use the f201 20 teeth (because f201 20 teeth is much harder then the original m03/m03m 20 teeth)
9#
 樓主| GigaRacer 發表於 2007-3-2 16:18:24 | 只看該作者

回復 #8 kaho0338 的帖子

icic, great info.  thanks!
10#
 樓主| GigaRacer 發表於 2007-3-4 16:26:40 | 只看該作者

回復 #9 GigaRacer 的帖子

how about using the new Beetle to race?
11#
 樓主| GigaRacer 發表於 2007-3-8 09:19:31 | 只看該作者
原帖由 kaho0338 於 2007-3-2 00:12 發表


F201 is a formula car from tamiya.....m03/m03m can use the f201 20 teeth (because f201 20 teeth is much harder then the original m03/m03m 20 teeth)



I am getting a M03.  I found the 20T from f201, but it's 06 teeth?  That's what in the M03?  Besides, what types should I use for TCS?  

Thanks!
12#
Tim 發表於 2007-3-8 11:45:12 | 只看該作者
06 is the pitch of the teeth, you don't need to worry about it, the F201 20T hardened pinion will fit any M03 - no problem! Great for TCS!

If you use the new beetle to race it is M04L, harder to setup and drive, M03 much easier.

By the way, are you running on carpet or ashphalt?
I run on ashphalt, and M03 is easier to drive and on most tracks faster.
But, I have friends in Singapore who told me M04 is faster on carpet.
13#
 樓主| GigaRacer 發表於 2007-3-9 09:08:03 | 只看該作者

回復 #12 Tim 的帖子

Our TCS will be racing in a parking lot.  Should I use 60D?  Warm weather.
14#
kit912 發表於 2007-3-11 19:54:24 | 只看該作者
係呢,m04買番黎果陣會唔會跟埋bearing?
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2025-1-10 04:50 , Processed in 0.119221 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表