My D4

Finally finish building it up..although now they have the WCE edition...

No.2, spend a lot of time on the body..

Another shot from the Top...

Try to make all the cable nice and tidy...

Plenty of space left on the car... Now just waiting for test run on the track....

The only complain for this car will be the shock....it's so hard to get it right..
Just hoping more people will be interest in EP buggy...

,good car!!
但似乎看图上你升级了61430的宽型前BUMPER,可以有效保护前臂码,另外应该是换了61499,可以用LOSI轮圈
车壳制作很有水准,可以看出花了很多心机

前避震架也换了吗?还是只加了螺丝垫圈增加受力面,原来版本前避震架由于凹孔位置太靠边易裂,WCE版本好了不少

Very nice body dude. I'm started to work on my D4 now.....

原帖由 crusaderlyf 於 2008-4-4 01:26 發表

                               
登錄/註冊後可看大圖

,good car!!
但似乎看图上你升级了61430的宽型前BUMPER,可以有效保护前臂码,另外应该是换了61499,可以用LOSI轮圈
车壳制作很有水准,可以看出花 ...

Wow Crusader! You got really good eyes... The new wider bumper is a must.. And yes, I am using the Losi rims because I have alot of stock..Also, it can interchange with my XXX-CR (rear tyres)
Yes, I am very proud about the out come of the body...And thanks for the good word!

原帖由 duncan520 於 2008-4-4 01:32 發表

                               
登錄/註冊後可看大圖

Very nice body dude. I'm started to work on my D4 now.....

Do it....quick!!! I am hoping there will be more people interest in EP buggy, it's actually alot of fun, specially nowadays with brushless system...

Waiting for your D4!

原帖由 crusaderlyf 於 2008-4-4 01:30 發表

                               
登錄/註冊後可看大圖

前避震架也换了吗?还是只加了螺丝垫圈增加受力面,原来版本前避震架由于凹孔位置太靠边易裂,WCE版本好了不少

No, I did not change it, all I did was flip the shock tower, and then as you say, use螺丝垫圈to spread the load. I do agree with you, the WCE is a big improvement on alot of little things..

原帖由 joho 於 2008-4-4 01:58 發表

                               
登錄/註冊後可看大圖

Do it....quick!!! I am hoping there will be more people interest in EP buggy, it's actually alot of fun, specially nowadays with brushless system...

Waiting for your D4!

Hey joho,

There did you get the new wider bumper ??
Thanks

You do mean where right? I think I get it from the "Cat" shop.

原帖由 joho 於 2008-4-4 16:12 發表

                               
登錄/註冊後可看大圖

You do mean where right? I think I get it from the "Cat" shop.

yup , shuld be where..... Thanks anyway

so how's your D4 coming around? Having fun building it???

原帖由 joho 於 2008-4-5 00:32 發表

                               
登錄/註冊後可看大圖

so how's your D4 coming around? Having fun building it???

No..... It was bad to fix the ball diff and I'm still figure out what reason why the lock nut coming that long. It doesn't looks the same one in maunal...

Other than that. It looks kick ass !!!

Could you share what type/brand of front & rear tires you're using now?
Thanks

Sure, but you know tyres will all depends on track condition.

Currently I am using Taper Pin from Losi front and rear. I founf out this combo always gave me a great deal of steering.. Normally I will also prepare a set of Holeshot from proline, I found this two combo mix and match will cater alot of different track condition already. The holeshot provide less steering thou..

原帖由 joho 於 2008-4-8 17:29 發表

                               
登錄/註冊後可看大圖

Sure, but you know tyres will all depends on track condition.

Currently I am using Taper Pin from Losi front and rear. I founf out this combo always gave me a great deal of steering.. Normally I wi ...

Hey dude,

Thanks for the info !! It helps alot. I 'll be just play around at my back yard and go to TRC some day.

Did you have the same issue on the ball diff ??

No, I read your other post which I did not have any issue at all. Let me know if you want me to take a photo of my diff, it may be a good help.