RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1199|回復: 5
打印 上一主題 下一主題
收起左側

買控問題

[複製鏈接]
跳轉到指定樓層
1#
raybee1211 發表於 2008-6-11 05:05:00 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
請問如果我係買 am mj  2pl   3pm  三隻,除左 多左channak外  三隻既反應時間係咪一樣架?我而家用緊mj  反應好慢 ,弓大`又唔想換 2.4g
如果1000內 買邊隻係最好?  要有兩隻接收  ,請大家比d意見  thx
2#
jacobchu2007 發表於 2008-6-11 08:47:18 | 只看該作者
3pm is FM, not AM.
Sure 3pm is the best of the three. Response time is faster and the signal is stronger.
3pm one set (one transmitter + 1 receiver+ 1 pair of crystals+ 2 3003 servos) ~ $8xx
          extra one receiver ~$3XX + extra 1 pair of c rystals ~12X
2pl  FM one set (one transmitter + 1 receiver+ 1 pair of crystals+ 2 3003 servos) ~ $5xx
         extra one receiver ~$3XX + extra 1 pair of c rystals ~12X
2pl  AM one set (one transmitter + 1 receiver+ 1 pair of crystals+ 2 3003 servos) ~ $4xx
         extra one receiver ~$18X + extra 1 pair of c rystals ~5X

2pl has better response than MJ

[ 本帖最後由 jacobchu2007 於 2008-6-11 12:07 編輯 ]
3#
倫ae86 發表於 2008-6-11 10:37:38 | 只看該作者
師兄咩叫多左channal??
係唔係可以玩兩個servo嫁??
4#
jacobchu2007 發表於 2008-6-11 12:11:19 | 只看該作者


Channels = The number of ways that the transmitter can be set to control.

Receiver usually has 2 channels, 3 channels, 4 channels, 6 chanels, 8 channels, 9 channels or even more....

Usually 2 to 4 channels are for cars.

For normal car, 2 channels receiver, channel 1 is for controlling the wheel direction
                                     channel 2 is for controlling the speed of the motor
  channel 3 for channging gear sets in oil car
  
For aeroplane or helicopter, they will usually use 4 to 9 channels, depends on different requirements, each channel can be set to control.
5#
 樓主| raybee1211 發表於 2008-6-11 20:13:55 | 只看該作者
唔該晒 jacobchu2007   thx
6#
prodanny 發表於 2008-6-11 22:42:40 | 只看該作者
我有2PL同3PM, 3PM多d野可以設定, 想詳細比較可以下載到Futaba下載說明書.   
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-16 21:36 , Processed in 0.039619 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表