BL motor for old buggy

I want to upgrade my old buggy to BL, can any ching advise what Turn motor is suitabel for :
1/. 2WD, RC10T
2/. 4WT, Avante
I am using 23T brushed motor now for both car. Thanks helping first.

1# gimsink

For reference:
my rc10b4 (4th generation rc10), i use hobbywing 9t.  acceleration and top-speed is very good.
i use 78 spur + 22 pinion @ 7.4v

For your reference
my topforce, i am using hobbywing 35A esc + 9T BL
72 spur + 25 pinion @ 7.4v lipo

i am satisfy with the speed!

RC10T用好盈9T係一個唔錯O既選擇啊！都有兄弟用緊！

我都有一架呀，遲d可以交流下

4# smallfaifai

1 more comment:
I have tried Hobbywing 13T for my RC10B4 as well.  I have geared it to Spur 78 + Pinion 27.
However, the acceleration is very lacking, while top speed is ok.
This setting loses a lot of low-end torque.

so... i recommend at least a 9T motor.

RC10T用好盈9T係一個唔錯O既選擇啊！都有兄弟用緊！

我都有一架呀，遲d可以交流下
smallfaifai 發表於 2009-3-27 16:52

                               
登錄/註冊後可看大圖

I have  tones of fun with B4 combo 好盈9T Too much power!  front tires lift off with quick "full chick"

I am the one who is using the Hobbywing 9T in my vintage RC10T. The performance is so far so good. I guess 9T (or 10T/11T) BL is good enough for this old stuff.

I think I will buy the HB 9T BL this week, but BL 9T = Brushed ? T....

I think I will buy the HB 9T BL this week, but BL 9T = Brushed ? T....
gimsink 發表於 2009-3-30 10:51

                               
登錄/註冊後可看大圖

9T BL ~ 19T B

Hobbywing 9T BL is 4300KV, so at 7.4V, the RPM is 31820.