[求助]摩打配搭

小弟部ta03想換摩打玩飄移既,想換走隻白豬,原裝既係14t摩打齒+43t SPUR GEAR,用番原裝apex square電變~
宜家想買隻27t or 30t摩打,不過摩打齒係kws好似淨係見到最低既17t,問題係唔知用27/30t摩打+17t摩打齒玩會唔會燒左隻電變呢??冇銀換咁多野

27T is same as 白豬,
30T is Slower than 白豬,but torque better

小弟部ta03想換摩打玩飄移既,想換走隻白豬,原裝既係14t摩打齒+43t SPUR GEAR,用番原裝apex square電變~
宜家想買隻27t or 30t摩打,不過摩打齒係kws好似淨係見到最低既17t,問題係唔知用27/30t摩打+17t摩打齒玩會唔會 ...
椰禮 發表於 2009-4-17 21:31

                               
登錄/註冊後可看大圖

u can change this only
http://www.tamiyausa.com/product/item.php?product-id=53068

如果我要換走粒14t摩打齒用17t既話用咩摩打岩d??

有冇人幫到我.......

5# 椰禮


if choose between 27t or 30t of course 27t better la.
But I suggest you 23t or black pig, 27t is only equal to white pig, you are not upgrading at all. Using 17t pinion gear will not burn anything even using 23t motor because this is still a very high gear ratio.

5# 椰禮


if choose between 27t or 30t of course 27t better la.
But I suggest you 23t or black pig, 27t is only equal to white pig, you are not upgrading at all. Using 17t pinion gear will not b ...
samitoneau 發表於 2009-4-19 06:57

                               
登錄/註冊後可看大圖

宜家用白豬既時候飄移入剿前動力唔係太夠有d推頭甩尾入彎,如果換27t/30t摩打玩慢飄
會唔會都有e個情況呢??家真係要23t/黑豬先解決到呢??

7# 椰禮


I think if you use 23t will be much better. Because cant drift properly if the wheel is not spining fast enough.

7# 椰禮


I think if you use 23t will be much better. Because cant drift properly if the wheel is not spining fast enough.
samitoneau 發表於 2009-4-20 06:31

                               
登錄/註冊後可看大圖

咁長遠黎計,23t好d定係黑豬好d??

9# 椰禮


what do you mean by 長遠黎計?
black pig no need to replace brush, cheaper running cost. But of course normal 23t motor is better, better performance. I think 23t is not much more expensive than black pig so 23t la for long term.