RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1141|回復: 6
打印 上一主題 下一主題
收起左側

TLP Expro II charger

[複製鏈接]
跳轉到指定樓層
1#
st_kuen 發表於 2009-4-26 16:00:05 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
C-hings,

What is the current should I for charging the 7.2v ni-mh battery:

A) for fast charging - I currently use 5A
B) for slow charging - use 5A also?
C) for fast charging the 6v 1400ni-mh receiver battery - use 1.5A?

Many thanks!
2#
 樓主| st_kuen 發表於 2009-4-26 19:10:25 | 只看該作者
Furthermore, when I connect the battery to the charger without pressing the yellow bottom, the charger should in the slow charge mode. A continue 'Beep Beep' sound is heard.
Is it normal that a continue 'Beep Beep' sound is heard in the slow charge mode.
Will the charging automatically stop? And how can I know the charging is finished in the slow charging mode?

Thanks!
3#
 樓主| st_kuen 發表於 2009-4-27 00:31:29 | 只看該作者
E:\Patrick\RC Car\charger.jpgphoto of charger!!
4#
Challenager 發表於 2009-4-27 01:28:14 | 只看該作者
A) for fast charging - I currently use 5A   
1000mah=1A, 2000mah=2A, 4500mah=4.5A、    ETC.....
B) for slow charging - use 5A also?
slow charging use a half. 例如:1000mah=0.5A,2000mah=1A, 4500=2A....
C) for fast charging the 6v 1400ni-mh receiver battery - use 1.5A?
6v 1400ni-mh=1.4A,     fast charging use 1A to 1.2A ok la
5#
samitoneau 發表於 2009-4-27 02:25:27 | 只看該作者
what model is your charger?
6#
samitoneau 發表於 2009-4-27 03:04:53 | 只看該作者
ar, the topic.

this charger is not hard to use. just follow the manuall and press the yellow button.

I usually discharge by myself and use peak charge. Its normal for the beep beep sound in slow charge mode. If you start the fast charge mode, the charger will stop automatically when the battery is fully charged. Then the charger will change to slow charge mode by itself. But usually this charger is not stopping at the right time. Your dont know when the battery is finished charging. if you charge at 1C, than you count the time of fast charge. if the fast charge time is much less than 1 hour, than you have to press the button and fast charge again. (of course don charge again when the battery is too hot because the battery might be dead).

This kind of charger hai gum ga la. You have to keep checking when the fast charge ends and calculate if the battery is finished charging or not. Other charger with LCD monitor is better. At least you know how full the battery is being charged.
7#
 樓主| st_kuen 發表於 2009-4-27 13:44:15 | 只看該作者
Thanks! samitoneau  & Challenager
Many thanks for your helpful information & advise.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-17 02:53 , Processed in 0.034280 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表