Slash, Slash 4x4, Slash 4x4 Platinum, RC10 T4, SC10 邊架定D ??

Slash, Slash 4x4, Slash 4x4 Platinum, RC10 T4, SC10  邊架定D ??
http://www.youtube.com/watch?v=tdIpQnOA6Rk

如果可以使用 1/8 Buggy 輪胎 或 1/8 truggy 輪胎, 頭,尾呔會唔會 hi 到殼 ??

I vote Slash 4x4

4x4 定，出灣快，線位要囉大d
2WD 樂趣，入灣快，線位可以好榨
1:8 buggy truggy tires 應該係17mm hex , 就算唔頂到殼，條狗骨杯芯可能幼得濟有墟位

4x4 定，出灣快，線位要囉大d
2WD 樂趣，入灣快，線位可以好榨
1:8 buggy truggy tires 應該係17mm hex , 就算唔頂到殼，條狗骨杯芯可能幼得濟有墟位
kingman7788 發表於 27/1/2010 13:18

                               
登錄/註冊後可看大圖

師兄
可唔可以使用 E-Maxx® Brushless Edition (#3908) 17mm Hex Adapter 落去 Slash 4x4 或 Slash 4x4 Platinum 到 ??

如圖

                               
登錄/註冊後可看大圖

師兄
可唔可以使用 E-Maxx® Brushless Edition (#3908) 17mm Hex Adapter 落去 Slash 4x4 或 Slash 4x4 Platinum 到 ??

如圖http://www.traxxas.com/products/ ... mages/3908_spline_h ...
chacha 發表於 2010-1-27 13:26

                               
登錄/註冊後可看大圖

我味試過唔敢講，不過照理應該得
但請問點解要用1:8 buggy truggy洛SC度?

唔記得同你講，1:8 truggy tires唔使諗，你睇睇下面

                               
登錄/註冊後可看大圖

我味試過唔敢講，不過照理應該得
但請問點解要用1:8 buggy truggy洛SC度?
kingman7788 發表於 2010-1-27 13:34

                               
登錄/註冊後可看大圖

唔得架~! 你地唔好亂試  人地有出專用adaptor....

For those looking for better handling and a wider tire selection for their HPI Blitz and Traxxas Slash 4×4, AKA is happy to announce the release of their 1:8 wheel adapters. Made from 7075 aluminum and hard anodized, these wheel adapters are a great addition to either of these trucks. Supplied with all the necessary parts, including AKA ‘SureGrip’ 17mm nuts to keep the wheels securely on the hubs the adapters install in just minutes and require zero modifications to the truck and the stock width and steering radius are kept in tact. Improve your tire choice and handling , all popular 1:8 buggy wheels can be used including the AKA Pro-5 wheel.

唔得架~! 你地唔好亂試  人地有出專用adaptor....

For those looking for better handling and a wider tire selection for their HPI Blitz and Traxxas Slash 4×4, AKA is happy to announce the  ...
tatame 發表於 2010-1-27 13:57

                               
登錄/註冊後可看大圖

thanks for sharing,
係咪原理一樣不過加闊左?

thanks for sharing

提高車殼在殼柱的位置, 選擇多1:8 truggy tires 咬地D.

http://www.rcmart.com/catalog/rc ... -buggy-p-29879.html
唔想換大 tires 可以試下呢隻，o交到你唔信，可惜而家no stock

今日見到 ... 4X4 Platimum HKD3100 ..

今日見到 ... 4X4 Platimum HKD3100 ..
X360 發表於 2010-1-28 22:38

                               
登錄/註冊後可看大圖

ching那裡看到的~~請問?

4X4 Platimum HKD3100
is it ready to run. including esc, motor etc?

13# rcray [
係..只要加個控同接收就玩得..
今日去左kws 15/16中,唔知買platinum版定買buggy 好

13# rcray [
係..只要加個控同接收就玩得..
今日去左kws 15/16中,唔知買platinum版定買buggy 好
mansiu 發表於 2010-1-29 03:17

                               
登錄/註冊後可看大圖

你想買咩buggy先?

13# rcray [
係..只要加個控同接收就玩得..
今日去左kws 15/16中,唔知買platinum版定買buggy 好
mansiu 發表於 2010-1-29 03:17

                               
登錄/註冊後可看大圖

slash 4x4 platinum la ~ 架車好正~ 我地成班車友一出就買左六部! 架野原裝已經跟晒aluminim wheel hub, Chub, shock, sway bar , center diff 可玩3cell既防水無刷同 buggy spec 無大分別, 又比buggy 多車殼選擇(Dakar vehical, shortcourse, baja....) 同已經差不多full option ! 另外再跟多一個限滑,wheel hub, 3隻spur gear , 一隻pinion gear(19T for 3cell 60mph) 做spear ! 真係抵爆

slash 4x4 platinum la ~ 架車好正~ 我地成班車友一出就買左六部! 架野原裝已經跟晒aluminim wheel hub, Chub, shock, sway bar , center diff 可玩3cell既防水無刷同 buggy spec 無大分別, 又比buggy 多車殼選擇 ...
tatame 發表於 2010-1-29 09:09

                               
登錄/註冊後可看大圖

師兄:
  我想問個限滑裝邊度?

師兄:
  我想問個限滑裝邊度?
tsk28 發表於 2010-1-29 10:54

                               
登錄/註冊後可看大圖

中間~ platinum 版係中差! 另外加多個限滑俾你有兩種玩法

15# kingman7788


ve8/8ight 電版/slash platinum

15# kingman7788


ve8/8ight 電版/slash platinum
mansiu 發表於 2010-1-29 11:23

                               
登錄/註冊後可看大圖

幾部都好車，你話底玩一定係slash
睇你追求d咩，race/fun/blast
另外vorza flux設計上我覺得好過VE8  
如果你有電子野又想玩buggy，VE8 or RC8e都係一個選擇，8ight出面賣哂電板，要自己買conversion kit改~
我地再講會俾人插 樓主問緊既係SC