新手買車 Scx10 or Tamiya Pajero or DF-03 RA??

新手買車 Scx10 or Tamiya Pajero or DF-03 RA??

用來玩爛地的不用點修理，易找Parts..

Thanks

你所講o既"爛地"...係點爛先?

anyway....
Scx10 係爬石...唔多飛得
Tamiya Pajero (cc01), 爬o下坡就可以, 唔係好飛得, 不過像真殼好靚, 改裝空間好大
DF-03 RA 應該最飛得...搵料都最易.

SCX10, 車架又正, 改玩水又易, 真係唔好差幾百, 要買cc01我讓自己部畀你算

我CC01 Pajero同DF03-RA　Evo X都有。。。
快的話一定係DF03-RA
DF03-RA玩Off road 同On Road都得～～

Scx10 only can go slow climbing?? can i play like a buggy and do some jump and free runs?

You want fast, slow or super slow?

I want want normal speed.. i just want a car that can play on and off road. No need super fast.. but don't want to be very slow too.

A car that can climb a bit but can also free run on the off road surface.

Thanks

咁就cc01啦~

Thanks 1524
CC01 = pajero??

回復 9# cloudpicker


    YES

CC-01 around how much now??

Also, if i want to modify to fit Landrover D90 body shell later which car is easier to mod ar? scx10 or CC01 ?

Where can i find Landrover D90 bodyshell??

CC-01 around how much now??  <---- $980 to 11XX...pajero 平 d...無esc仲平, 其他車款貴 d

Also, if i want to modify to fit Landrover D90 body shell later which car is easier to mod ar? scx10 or CC01 ?  <------- cc01 易 d...比例上好 d.

Where can i find Landrover D90 bodyshell??  <---- 好似團購版有人出左post

If you want to use D90, buy the CC01 VW Touareg. It has a longer pro-shaft for the D90 wheelbase.

If you want to use D90, buy the CC01 VW Touareg. It has a longer pro-shaft for the D90 wheelbase.
peter7 發表於 2010-4-1 16:19

                               
登錄/註冊後可看大圖

ching...請問知唔知 tourage 長幾多?

ching...請問知唔知 tourage 長幾多?
1524 發表於 2010-4-1 16:26

                               
登錄/註冊後可看大圖

長 25mm

回復 15# peter7

thanks!

SCX10 X D90
http://www.rccrawler.com/forum/showthread.php?t=178260
http://tw.myblog.yahoo.com/bbg81 ... =3202&next=3137

CC01 X D90
http://tw.myblog.yahoo.com/bbg81 ... &l=f&fid=14

樓主自己揀