T3 11 今日的我打倒昨日的我

今日
New Double Steering System
The new double steering system is ALL NEW for XRAY electric touring cars. The double steering system is supported by 6 ball bearings and runs on aluminum stands. Ackermann is easily adjusted by inserting shims between the steering plate and steering rods. The new steering system features a lower mounting position for steering linkage which makes the car handle easier going into corners. Handling is easily adjusted for more aggression by inserting a shim between the steering block and steering rods
http://www.teamxray.com/teamxray ... d3465dfdba857bf511f
昨日
Adjustable Steering Bell-crank
An adjustable position steering bell-crank is also used to change steering Ackermann settings. By turning a pair of composite eccentric bushings in the chassis and top deck, you can move the complete assembly forward or backward. This is in addition to the five Quick-Saver™ Ackermann positions. The bell-crank is supported by two ball-bearings.

The T3 bell-crank was moved more to the rear compared to the T2 platform so as to optimize the Ackermann position.
http://www.teamxray.com/teamxray ... bber-Spec%20Edition

T3 用不對稱底板,現在又對稱
以前話中央轉向好,現在又話分開好,個理由都可以接受既,話轉向唔會跟車架扭,
我都覺得係T3唯一的缺點,如果裝了中柱鏍絲車頭太硬,唔裝同人拍得勁轉向又跳出黎.....
2樓板幾好睇我like
所以我都會買既!

一直都係雙柱好過單柱.....

穩定性高得多

願聞其長!

願聞其長!
gtimax 發表於 2010-10-2 11:43

                               
登錄/註冊後可看大圖

之前係另一個POST講過,不再詳述.

有冇LINK?

有冇LINK?
gtimax 發表於 2010-10-2 11:51

                               
登錄/註冊後可看大圖

類似係一個車架改裝裡面O既對答嚟....

一位車主將車由單柱改成雙柱O既POST.....

自己搵喇....

Hey, the Title of the topic is a bit too aggressive! It's an improvement!!

http://bbs.rc-evo.com/viewthread.php?tid=184934&highlight=t2

HERE

thanks a lot amat!
aggressive? yes! attrative topic! 嘩眾D啦
我認為單柱雙柱各有長短,而轉向不連接2樓板才是重點,扭動不影響轉向!
417,TCX 都係咁,大勢所趨!

如果係我就唔用servo saver. 虛位多

C hing, I like your title.  

Just seems not much change except the steering portion.  I was hoping to see "quick remove" front and rear diff, and "quick remove" center pulley.  And xray factory gear diff

所以嘴硬是沒有用的，造工、用料再好，設計理念趕不上也沒法拿好成績現在的車就好像時裝一樣。。。。