RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Want to get into 1/12 car [打印本頁]

作者: bigheman 時間: 2011-3-15 21:14
標題: Want to get into 1/12 car
Hi Chings

I always wanted to try 1/12, please kindly suggest which chassis to start with :-)

Many many thanks!!

作者: wlc 時間: 2011-3-15 22:01
team associated RC12 R5.1 $1500

作者: Dsius 時間: 2011-3-15 22:57
how about top rebel?

作者: hardcore 時間: 2011-3-15 22:58
X-ray or corally

作者: QSO 時間: 2011-3-16 13:08
R12

作者: pcm118 時間: 2011-3-16 13:28
Actually all 1/12 chassis are more or less the same, you can just choose one based on your brand preference, budget, and availability of spare parts.

作者: jf813 時間: 2011-3-16 13:29
回復 3# Dsius

Top not durable wor...... r5.1 la

作者: Dsius 時間: 2011-3-16 14:33
回復 7# jf813

the parts supply for r5.1 stable?

作者: bigheman 時間: 2011-3-16 21:36
Was in KWS and thought that TOP rebel will have parts supplies, how about 12R5.1 parts?

And do 1/12 like 1/10 that they have standard in wheels mount?

作者: bigheman 時間: 2011-3-16 22:20
Also what esc are good for 1/12 :-)

作者: 1524 時間: 2011-3-16 23:16
幾款12仔link pan car (除左YOKOMO外)無論價錢同設計都大同小異,
不過都可以簡單分用"SIDE SHOCK" (亞so屎R5.1, 蛇)同用"DAMPER TUBE"(CRC, TOP)去做扭腰,
DAMPER TUBE o既設計同調較都比較簡易, 耐用程度都似乎較高.
如果新入手, 可以考慮damper tube o既設計.
damper tube o既link car....crc同top都似乎比較易搵parts.
講樣同finishing, top似乎好d, 不過 crc 有歷史有往績(但係衰在用縲絲用美規).
兩者中我有crc...零件做工真係麻麻...不過o係無咩點set o既情況下, 用3.5t 都尚算好跑.

以上資料希望幫到你~

作者: bigheman 時間: 2011-3-16 23:26
Thank you so so much for typing them all out. THANK YOU !!

作者: jf813 時間: 2011-3-17 12:28
CRC parts can go to cat shop and 5.1 parts can go to Urban. Most of the stuff are in stock and they are cheap anyway. hehe

作者: bigheman 時間: 2011-3-17 20:09
Many thanks!!! so does it use standard size servo ?

作者: 1524 時間: 2011-3-17 20:39
回復 14# bigheman

12仔用特別SIZE SERVO...常見有FUTABA 9650.
SAVOX 同SANWA都有出.

作者: bigheman 時間: 2011-3-17 20:54
Great thanks ;-)

作者: Dsius 時間: 2011-3-17 23:57
回復 15# 1524

SAVOX SC-1251MG ok ma?

作者: 1524 時間: 2011-3-18 00:34
回復 17# Dsius

唔記得型號了...問店員一定知~

作者: Dsius 時間: 2011-3-18 00:59
回復 18# 1524

ok, thx~

作者: bigheman 時間: 2011-3-20 00:54
Finally got a 12R5.1 (heheheh 2nd hand) with good equipment in it, thanks to a nice Chings.

I will be using it in TRC, any tips on roll out?

4.5T with 3.7V battery

Many thanks!!!

作者: 1524 時間: 2011-3-20 09:39
回復 20# bigheman

I saw your reply. The offer is super attractive!!!!

作者: bigheman 時間: 2011-3-20 10:46
Yes, the car is quite nice and the gears in it is great too, I will also play in JV ah, hope I can get there soon!!

作者: bigheman 時間: 2011-3-21 22:07
While I was rebuilding this Asso 1/12, and found that there are lots of slack in the steering push rod, so I replace the new ball cup and still find the slack, is that normal?

Cheers

作者: bigheman 時間: 2011-3-22 17:04
I had so much fun running the 1/12 today at JV, will go again on the weekend :-)

作者: 1524 時間: 2011-3-22 17:11

While I was rebuilding this Asso 1/12, and found that there are lots of slack in the steering push r ...
bigheman 發表於 2011-3-21 22:07

登錄/註冊後可看大圖

咁你今日跑完, 覺唔覺有鬆, 會走o太呢 d 情況出現? 無就唔使攪了

作者: bigheman 時間: 2011-3-22 17:59
no problems at all, hahahah, interesting isn't it.

I heard Chings say new tires does not run as nice a trimmed down tires, why is that?

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)