Tc6 spec r 牙差問題

師兄們請指教

小弟買了spec r yokomo牙差想裝落tc6到 但發覺tc6萬向係粗的放唔落個牙差杯到。係唔係要磨牙差杯如果換yokomo bd條萬向又得唔得？

謝謝

係要用鑽咀law大佢

係要用鑽咀law大佢*2 =輕輕一下行左。

要几大鑽咀?  我又没有电鑽, 知吾知又没有模型店能代勞?

有次上22樓見到店主幫過客妀個牙叉
你可以上去問個店主妀唔改

spec r 0個隻鋼杯黎..好難磨~

use a sanding wheel to enlarge it.  The different is only 0.4mm.  

回復 7# jf813

What is a sanding wheel?  Do you have any link?  Could I easily find it in Ap Liu Street?

回復 8# yikl

Of course, at Ap Liu Street U can easily find one.