新手請問12仔操控

架12r5 一大油轉向就打白鴿轉，請問係setting邊度錯呢？

珠差太鬆,呔水末乾...!

珠差我較緊架喇，不過無用呔水，玩12仔係咪一定要落呔水架，thanks師兄

12仔轉向加大油（一下子俾油）通常會白鴿轉，要柔性上或者用電變設定一子。
因為12仔反應非常靈敏的。

dragonofgreen 發表於 2011-10-15 17:10

                               
登錄/註冊後可看大圖

12仔轉向加大油（一下子俾油）通常會白鴿轉，要柔性上或者用電變設定一子。
因為12仔反應非常靈敏的。

正解 起左步之後就唔會有咁既情況.

呔水 D CHING 話用左咬D, 不過我無用.. 因為試過好似分別不大.

電變punch set 細 D，越低越好！！試試有無改變，師兄教落

Lrp 電變我set mode 2="4"  , o唔ok呢？

我自己用HW，我只知punch set細D，起步無咁大油，無咁易打白鴿轉。你找找HW(punch)=Lrp(?)

need smoother finger

Mailnly because the tyre grip and diff, tight up diff and then use soft rear tyre with tyre water, also can set less punch and exp in remote if needed.. Some Ching add weight at the rear so that rear tyre have more friction

thanks for sharing Ching.

Any chance that one of the rear tire wheel is bent and create this problem?? I have the same situation and is looking for answers too...

Thank you all CHing!!