想買車

今日部TT01俾朋友啲TA-05放到好遠, 好冇引
諗住買部好啲車去同佢哋媡,
TA05 定 TB EVO 5 跑街好啊, 俾啲意見啦!!!

tt-01= ="

set好些沒什麼問題的吧= =?

TB EVO 5

set得好o既tt01用23t係好快ga......

原帖由 ALEXANDER 於 2006-10-13 01:31 發表
TB EVO 5

你估個個人手車好似你咁快狠準咩.....?
如果佢d朋友都係玩23t就玩盡部tt01先啦

我同我啲朋友都係用星星23t, 鬥直路就俾佢放

原帖由 bikelover 於 2006-10-13 01:36 發表
我同我啲朋友都係用星星23t, 鬥直路就俾佢放

你齒比未用盡姐.......

with the same gear ratio?

你點set車先…唔1定話換過部車就1定會勁過人(高級車當然係比較好)
好睇人同車點夾

原帖由 Nobuta 於 2006-10-13 01:40 發表
你點set車先…唔1定話換過部車就1定會勁過人(高級車當然係比較好)
好睇人同車點夾

agree ! ...... i use 25T sport tune tt01, my fd use full option TA05 23t .....he just a bit faster then me ...

if u think it is still slow, just try 19T moto..hahaha

[ 本帖最後由 kaho0338 於 2006-10-13 01:49 編輯 ]

原帖由 kaho0338 於 2006-10-13 01:48 發表


agree ! ...... i use 25T sport tune tt01, my fd use full option TA05 23t .....he just a bit faster then me ...

if u think it is still slow, just try 19T moto..hahaha

我部tt01而家用23t配6.0齒比......加速暴力地快,唔夠溫度o既話仲甩到飛起tim...

原帖由 yuiche 於 2006-10-13 01:51 發表
我部tt01而家用23t配6.0齒比......加速暴力地快,唔夠溫度o既話仲甩到飛起tim...

再用盡D齒比!!咁就更加快喇!!

原帖由 evo2005 於 2006-10-13 02:14 發表

再用盡D齒比!!咁就更加快喇!!

跑街6.0都夠......唔想咁快換碳刷住....
落場就......

想快的話飛一飛摩打銅頭，同埋用啲新電試試。

原帖由 schumacher 於 2006-10-12 14:51 發表
想快的話飛一飛摩打銅頭，同埋用啲新電試試。

Invest a 飛銅頭 machine now??  Or rather go buy a brushless system??  

Brushless motor on TT-01?  Gear ratio needed is hard to achieve....If you want to confirm the effectiveness of my suggestion, you can take your motor to model shop for comm cutting before you go further. About batteries, well, you need good batteries anyway if you want to go fast, no matter what system you use.
In my opinion, a comm lathe worths any penny if you plan to play on in 23T class. Brushless system is another story. I think you need another car 'cause, for example, with a 3.5R system it needs a gear ratio around 12:1, which is almost impossible with TT-01.