RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1993|回復: 14
打印 上一主題 下一主題
收起左側

3PK壞咗可以去到修理呀

[複製鏈接]
跳轉到指定樓層
1#
peugeot206 發表於 2006-12-13 13:09:36 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
一年唔夠無單

謝謝
2#
courel500 發表於 2006-12-13 13:16:23 | 只看該作者
send 個 mail 去 futaba ( japan / usa ) 問下可唔可以 send 返去整 ?
3#
B-4 發表於 2006-12-13 14:07:02 | 只看該作者
甘搞法..可以買過支新3PK了..
4#
m93r 發表於 2006-12-13 14:30:13 | 只看該作者
寄過去來回都4,5百蚊,又要等幾個月,仲未計人工零件
買過支新把啦
5#
kaho0338 發表於 2006-12-13 14:36:47 | 只看該作者
你可以拆d軚跌, 個d 出來sell sell 佢既, 都值唔少$....
之後再買過支3pk, 一係try try ex10/m11
6#
NANA 發表於 2006-12-13 15:59:54 | 只看該作者
點壞法呀?
7#
 樓主| peugeot206 發表於 2006-12-13 16:34:45 | 只看該作者

回復 #6 NANA 的帖子

開機無反應呀
8#
土星一號 發表於 2006-12-13 17:21:21 | 只看該作者
嘩,我正想買支,多謝堤點
9#
gibson 發表於 2006-12-13 17:40:48 | 只看該作者
原帖由 peugeot206 於 2006-12-13 13:09 發表
一年唔夠無單

謝謝



If I have this problem , I will go to the RC shop which I bought the 3pk, to see what is my next step.  I think Futuba is a big company, they should responsible for all the after sales service.  

Many years ago, if I have any problem, I will bring to Radar Shop, they will mail it to Japan for service and mail back, the charge was very reasonable, sometimes they just changed to a brand new one for you.
10#
wave 發表於 2006-12-13 17:45:20 | 只看該作者
原帖由 gibson 於 2006-12-13 17:40 發表



If I have this problem , I will go to the RC shop which I bought the 3pk, to see what is my next step.  I think Futuba is a big company, they should responsible for all the after sales servi ...


佢地只會收番運費.
11#
 樓主| peugeot206 發表於 2006-12-13 19:50:00 | 只看該作者
問咗Radar, 等夠其它壞parts一次過運+維修 至少三個星期。運費$100-$200
獨立運速遞+維修約兩星期左右。
維修費另計
12#
gibson 發表於 2006-12-13 19:57:52 | 只看該作者
原帖由 peugeot206 於 2006-12-13 19:50 發表
問咗Radar, 等夠其它壞parts一次過運+維修 至少三個星期。運費$100-$200
獨立運速遞+維修約兩星期左右。
維修費另計


Futaba made tons of 3PK and 3PKS in the market, of course few of them may had defect.  Even porsche and Ferrari also had Friday cars.   If I were you, I will go ahead to send it to repair.....you may gain experience of Futaba how to repair your 3pk....   
Around 18 years ago, my 9 channels pcm receiver was demaged, at that time, the pcm was quite new in the market, I sent it to Japan, in return, they sent me a brand new one........ caused me HKD36.  mailing charge....  one and a half month...  by surface.....
13#
minimini 發表於 2006-12-13 20:01:09 | 只看該作者
原帖由 gibson 於 2006-12-13 19:57 發表


Futaba made tons of 3PK and 3PKS in the market, of course few of them may had defect.  Even porsche and Ferrari also had Friday cars.   If I were you, I will go ahead to send it to repair..... ...


that means at that time Futaba was not able to repair your 9 ch pcm..........so they send you a new set instead......no other better method.......
14#
gibson 發表於 2006-12-13 22:35:06 | 只看該作者
原帖由 minimini 於 2006-12-13 20:01 發表


that means at that time Futaba was not able to repair your 9 ch pcm..........so they send you a new set instead......no other better method.......


May be too difficult to fix, Its still working fine in my M04.  


                               
登錄/註冊後可看大圖
15#
清清 發表於 2006-12-13 22:52:16 | 只看該作者
羅去偉高佢會幫你寄返廠整,只收運費約百多元,約三個月~
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-1 15:24 , Processed in 0.055827 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表