有冇兄弟係有玩ＴＡ－０３既？

想問, 如想改返做頭單/尾直~有冇方法呢~

請大大幫下手呢

I remeber TA03 haven't 頭單＆尾直 ka wo!

尾直濕便將個牙差落鋼膠痴死= =

頭單......好像只有中單kit而已= =

[ 本帖最後由 毒魚 於 2006-12-14 13:50 編輯 ]

咁有冇人知道,星星出左部ta03 drift pro~係用咩波箱?中單定點

有出過頭單, 但新既已經無哂, 要搵二手.

有冇d logo既代替品可以搵得返呢

TA03 is using one belt, not need to have middle one way.  
You may check check the manual first.

http://www.tamiya.com/japan/rc/manuals.htm

有個叫torque splitter 既shaft, 有單向+ 前後金屬牙,早排都仲見有得賣

There is also a one-way bearing that can replace TA01/2/3's metal diff. gear.
You can say that is a 頭單...

set 車會好煩
因為要拆好多野先開到個波箱
開牙差好過

去興記睇下la,個度有ar,,,不過價錢.......自己衡量下la~~

原帖由 soilderman83 於 2006-12-14 13:40 發表
I remeber TA03 haven't 頭單＆尾直 ka wo!

that's have 頭單
part no.53200

原帖由 毒魚 於 2006-12-14 13:49 發表
尾直濕便將個牙差落鋼膠痴死= =

頭單......好像只有中單kit而已= =

also have 中單