MT4S點轉FH2 mode?

MT4S點轉FH2 mode?
我的只有DS2, FH3 and FH4
bind唔到RX371w

Sanwa MT-4 can be operated with all Sanwa 2.4GHz FHSS-2, FHSS-3 and FHSS-4 car receivers: RX-371, RX-442FS, RX-451, RX-451R.

http://sanwa-denshi.com/rc/car/propo/mt-4s.html

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the BIND menu.
The following Modulation Type options are available:
FH2 - Select this Modulation Type when using an Airtronics 2.4GHz FH2 surface receiver.
FH3 - Select this Modulation Type when using an Airtronics 2.4GHz FH3 receiver.
FH4T - Select this Modulation Type when using an Airtronics 2.4GHz FH4T Telemetry receiver.
FH3F/FH4FT - These Modulation Types are NOT used in North America. They are typically used in France.
2) Press the ENTER key. The BIND menu will be displayed and [RF MODE]:FH4T will be
highlighted.
3) Press the ENTER key, then scroll UP or DOWN to select the desired Modulation Type,
then press the ENTER key a second time. Set to (Modulation Type) NO/YES will be
displayed.
4) Scroll DOWN to highlight YES, then press the ENTER key.
02.bind (bindi ng, modu latio n ty pe and ser vo operati ng mode ) system
Changing the Channel Mode - FH2 Modulation Type Only:
When the FH2 Modulation Tyep is selected, you can choose to operate the transmitter in either 2-Channel Mode or 4-Channel
Mode. This option is available ONLY when [RF MODE] FH2 is selected.
1) From within the BIND menu, scroll DOWN to highlight [CH]:4ch.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired Channel Mode.
Selecting 2CH will enable 2-channel operation (Steering and Throttle). Selecting 4CH
will enable 4-channel operation (Steering, Throttle, Auxiliary 1 and Auxiliary 2).
BIND CH setting range is 2CH and 4CH. The default setting is 4CH.
IMPORTANT:

轉 FH2 mode

Thanks ching
我果枝得DS2,FH3,FH4,無FH2
是因為日本買的貨的分別?

是。因為日版行DS2

禁ds2 bind到w371嗎？

No. 不過日版W371好似行DS2

顶顶顶