Kyosho - Wild Dodge Ram " Instruction manual "

各位師兄,
請問有冇人有哩架京商大腳油車既 " 說明書 " ?
有既話可唔可以scan後send 比我呀?

Thank you so much.

插住火咀電影相咁型.....
星期六你會唔會帶埋架934去試??

hard to find manul woo
but is this link help ??
http://www.dansdata.com/qrc.htm
...you may ask that guy for sent you manul

[ 本帖最後由 abcde 於 2007-4-18 21:48 編輯 ]

原帖由 ~出前一丁~ 於 2007-4-18 19:38 發表
插住火咀電影相咁型.....
星期六你會唔會帶埋架934去試??

火咀電已壞, 張相係上手車主影的.

原帖由 abcde 於 2007-4-18 21:16 發表
hard to find manul woo
but is this link help ??
http://www.dansdata.com/qrc.htm
...you may ask that guy for sent you manul

Hi Bro,
I just sent e-mail to Dan for help. Hope he will reply to me ASAP la.

原帖由 fyin 於 2007-4-18 23:38 發表


火咀電已壞, 張相係上手車主影的.

就係比你賣左，我遲你一步！我唔制呀！

[ 本帖最後由 大頭妹 於 2007-4-20 01:01 編輯 ]

Hi 大頭妹,
剛剛又有一部向7:00可左右post, 不過8:00已經賣咗啦. 仲係$450.-
不過冇接收.我都想買黎當parts.
下次快手啲啦, 如果買到就一齊玩啦. 但你先要搵番個殼先.

原帖由 fyin 於 2007-4-20 00:57 發表
Hi 大頭妹,
剛剛又有一部向7:00可左右post, 不過8:00已經賣咗啦. 仲係$450.-
不過冇接收.我都想買黎當parts.
下次快手啲啦, 如果買到就一齊玩啦. 但你先要搵番個殼先.

今日反左大陸！成十點先反！點知喎

Hi , There is  manual at Kyosho's site. Although  not 100% identical to your model but the parts are more or less the same.


You can see it here:

http://www.kyosho.com/jpn/suppor ... 1_megaforcejr_m.pdf

原帖由 rc2006 於 2007-4-20 01:12 發表
Hi , There is  manual at Kyosho's site. Although  not 100% identical to your model but the parts are more or less the same.


You can see it here:

http://www.kyosho.com/jpn/support/instructi ...

Hi Bro,
Thank you so much!  its manual almost same as my truck.
So I can print out for re-assemble la.

Thank your help again.