Truggy 最好配邊隻engine?

1/8 Truggy 最好配邊隻engine? Price below HK$1,500

原帖由 boogie 於 2009-1-30 16:34 發表

                               
登錄/註冊後可看大圖

1/8 Truggy 最好配邊隻engine? Price below HK$1,500

STS 28/30
SH 28
OS 28好似貴多些少.....

俾多少少買OS 28XZ，鬥車都夠用！自己玩吓嘅，21級機都夠o架喇！

小弟用Buggy副 Picco 3 Port 21机放落架CRT X1都幾好玩夠自己用 鬥車另計

[ 本帖最後由 shanfung700 於 2009-1-30 18:44 編輯 ]

How about Axial .28RR? Any comment?

but I'm worry the parts backup maybe not enough

平平地STS, 信心同品質保證就OS

i have GRP 28 and OS 28XZ, OS is the best!

Most Japanses rc fans will be think OS is the best for sure

除咗OS易配parts外！STS都OKo架！平平地買部紅頂21T(舊款綠頂)！都係$1200左右！Rebuild con rod 同 bearing都唔過$400！部機唔慢o架！Truggy用嚟鬥車都仲得！！

原帖由 師傅東 於 2009-1-31 15:13 發表

                               
登錄/註冊後可看大圖

除咗OS易配parts外！STS都OKo架！平平地買部紅頂21T(舊款綠頂)！都係$1200左右！Rebuild con rod 同 bearing都唔過$400！部機唔慢o架！Truggy用嚟鬥車都仲得！！

Thank you!! but I don't want to buy 撻箱~  
what's good for a 手拉 or roto start engine?

                               
登錄/註冊後可看大圖

SPECS:
Displacement: 0.298 cu in (5.0cc)
Bore: 0.728" (18.5mm)
Stroke: 0.717" (18.2mm)
Practical RPM: 4,000-36,000
Power Output: 3.0 ps/28,000 RPM
Weight: 12.7oz (360g)

MNP兄提供呢部OS 30VG手拉都唔錯！但呢部機特性只係大扭力(低扭)！高轉高速欠奉！
又係嗰句！玩吓就冇乜所謂！同人片或者鬥車就"抆"啲喇！

因為呢部機平呀嘛

原帖由 boogie 於 2009-1-31 15:37 發表

                               
登錄/註冊後可看大圖

Thank you!! but I don't want to buy 撻箱~  
what's good for a 手拉 or roto start engine?

this os21 can be started with hpi roto start system.
http://osengines.com/engines/osmg2073.html

[ 本帖最後由 firefox 於 2009-1-31 18:18 編輯 ]

I geared the OS 30VG before and agreed the high speed is not enough. I'll try SH21 2008 or 2009

I am always afraid a 21級 Engine is not enough for a truggy, should it be at least 28級?