請問怎樣可洗去舊的車殼噴油

請問怎樣可洗去舊的車殼噴油,thanks

登錄/註冊後可看大圖

alan .... u have a lot of buggies of this era .... lets have a run and fun  
a on road or glassland play.

Dot 3 brake oil and tissue would help to remove old paint.

Thanks. Dot 3 brake oil where Ican get? oil station?

問左好多次, 又答過好多次
http://bbs.rc-evo.com/viewthread.php?tid=65524&highlight=RC10

No brake fluid for lexan!!!

THANKS OF YOUR ADVISE

bro tiger ~

how to know it is a Lexan  or PC ....
is lexan mostly made on the underbody ?

and what will happen if brake fluid on lexan ?

Lexan widely used in clear Body where you will apply paint from underside (Vacumn Forming).  Lexan will melt using brake fluid....

PC (polycarbonate) and lexan are both materials for making clear body, most tamiya bodys are made with PC.

i think lexan is mostly made for underbody , since it is harder .

please correct me if i m wrong.

is lexan the trademark of polyvarbonate of GE??

[ 本帖最後由 fat_fat_cat 於 2008-3-21 12:15 編輯 ]

原帖由 go2usie 於 2008-3-21 11:48 發表

                               
登錄/註冊後可看大圖

PC (polycarbonate) and lexan are both materials for making clear body, most tamiya bodys are made with PC.

i think lexan is mostly made for underbody , since it is harder .

please correct me if ...

Thanks, I don't know Tamiya use PC also.

if I don't remember wrong, japanese company only use PC, only US company us lexan from GE(lexan is a trade name)

there are cases on my vintage buggies... Egress and TopForceEVO.. top body is PC and the undertray are made with Lexan.... mostly, the undertray do not apply color.

i think that only source of PC sheets problems.  may be cause by need of thickness.  When we first time see lexan, i think is at 模型天地, adv for associated rc-12e, since most other company still use plastic of abs.  lexan from ge, made helmet (i think is faceshield) for US astronaut. lexan is polycarbonate resin thermoplastic.

orrrrrr~~~~~ thanks fat fat cat~

then, does it mean, PC and lexan are the same thing.

then , we should or should not use the brake fluid on the PC(Lexan) then~ ??

yup, we use PC a lot nowadays, actually it is always bad for any kind of chemicals.

thinner even will break it down..

I use sand paper to remove paint before...

I think some other bros had improved way to do that... but I don't know

[ 本帖最後由 fat_fat_cat 於 2008-3-23 00:51 編輯 ]

I tried Gunza thinner without any problem..

break down not means instant, just the performance will degrade, long terms still bad

原帖由 go2usie 於 2008-3-22 14:17 發表

                               
登錄/註冊後可看大圖

orrrrrr~~~~~
then, does it mean, PC and lexan are the same thing.

then , we should or should not use the brake fluid on the PC(Lexan) then~ ??

Polycarbonate is the chemical name of Lexan. They are the same.