RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1290|回復: 6
打印 上一主題 下一主題
收起左側

新手想問2.4g問題,thx~~~

[複製鏈接]
跳轉到指定樓層
1#
checkie 發表於 2008-7-9 05:45:09 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
我有一支控,但三個receiver三架車
需要每玩一架車就要connet一次嗎?
恕我新手唔識問埋o的低能問題,多多包涵~
2#
penny. 發表於 2008-7-9 10:13:48 | 只看該作者
頭一次做左Pairing就可以喇!
3#
penny. 發表於 2008-7-9 10:14:59 | 只看該作者
之後每一次開控開車就玩得!
4#
GigaRacer 發表於 2008-7-9 13:41:23 | 只看該作者
How about 2 支控,但三個receiver三架車?

receiver can pair with how many modules?
5#
penny. 發表於 2008-7-9 13:53:06 | 只看該作者
有機會試試先!!!
6#
jacobchu2007 發表於 2008-7-9 23:03:49 | 只看該作者


One transmitter can be paired up with many receivers, but one receiver can only paired up with one transmitter at a time. That means, when you had paired up one transmitter with a receiver, you had to paired with this receiver with another transmitter. After you had paired up the receiver with another transmitter, you can not played this receiver with the original transmitter unless you paired up them again.
7#
GigaRacer 發表於 2008-7-9 23:56:29 | 只看該作者
Thanks, Jacob.

Thought I could leave one TX in the office, and one TX at home to control any car I bring to work.  
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-5 02:22 , Processed in 0.027622 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表