RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2483|回復: 10
打印 上一主題 下一主題
收起左側

upgrading tomy caul

[複製鏈接]
跳轉到指定樓層
1#
vrally582 發表於 2008-7-31 10:40:30 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
I just got a tomy caul car. it looks so cool but pretty slow. so i changed a tamiya 4wd high torque motor to it n  hope to make it faster.
finally done!! It runs faster but i need to push it at the beginning. Otherwise it doesn't have enough power to make the motor run.

I wanna know does this motor fit to caul car? Or maybe i need to add some cap on it(not sure is it the way to make it work).
2#
terrynck 發表於 2008-7-31 13:01:15 | 只看該作者
原帖由 vrally582 於 2008-7-31 10:40 發表
I just got a tomy caul car. it looks so cool but pretty slow. so i changed a tamiya 4wd high torque motor to it n  hope to make it faster.
finally done!! It runs faster but i need to push it at the b ...


這是電流不足的緣故:
CAUL's pcb係不能推動多過1,200mah嘅摩打,你可以修改pcb增大電流(比較麻煩),或可考慮增加輸入電壓,如串聯多兩個AAA電,不過要用Toyota Hiace殼,其他殼未必够位。但改鋰電就無需換殼:http://bbs.rc-evo.com/viewthread.php?tid=85464&extra=page%3D3
由於架車設計唔咬地、轉向不足,越係改快就越甩!

[ 本帖最後由 terrynck 於 2008-7-31 13:05 編輯 ]
3#
 樓主| vrally582 發表於 2008-7-31 15:06:10 | 只看該作者
if i add 1 more aaa battery (to be 3.6v) , will it over voltage and burned the pcb ? i dono the working voltage of that pcb. and also 轉向不足 is a big problem of this car. the front servo's power is so weak. how to fix it.
4#
terrynck 發表於 2008-7-31 19:44:16 | 只看該作者
原帖由 vrally582 於 2008-7-31 15:06 發表
if i add 1 more aaa battery (to be 3.6v) , will it over voltage and burned the pcb ? i dono the working voltage of that pcb. and also 轉向不足 is a big problem of this car. the front servo's power is  ...


輸入3.6v電壓不會燒pcb (but do not use more than 4 charging batteries/total 4.8V),當電壓增大轉向動力同時加大。
Rev-Tuned Motor is better than Torque-Tuned Motor when playing in this car.

[ 本帖最後由 terrynck 於 2008-7-31 19:56 編輯 ]
5#
 樓主| vrally582 發表於 2008-8-1 02:43:57 | 只看該作者
why" Rev-Tuned Motor is better than Torque-Tuned Motor when playing in this car." ? what different to Torque-Tuned Motor?
And it seems to be hard to install additional aaa battery  to  the car. it doesnt has enough space inside. i m still looking for a cell phone battery can fit  to the car. maybe .... can i install different kind size of 1.5v battery to the car. like bitcharG battery or  coin size battery?
6#
terrynck 發表於 2008-8-1 12:54:49 | 只看該作者
原帖由 vrally582 於 2008-8-1 02:43 發表
why" Rev-Tuned Motor is better than Torque-Tuned Motor when playing in this car." ? what different to Torque-Tuned Motor?
And it seems to be hard to install additional aaa battery  to  the car. it d ...


CAUL設計好有問題:
轉向不足又唔咬地,用高扭力摩打起步果陣尾轆咪打滑、部車咪左甩右甩,都唔可以好靈活控制喥佢响細地方;但係用高轉速摩打起步果陣柔啲、尾轆食到力,部車到極速果陣時咪入到靚彎囉!但只岩係大地方玩。
用Hiace殼玩就够位加2粒3A電,部份SUV可加到1粒,其餘跑房只可改用鋰電。
你可嘗試其他size充電,不過留意容量,用Char-G電、鈕電玩唔得幾耐。
另外,個IR接收器駁線出車頂接收會強好多!
7#
 樓主| vrally582 發表於 2008-8-2 07:56:34 | 只看該作者
thx for your comment.   I  added 1 additional aaa battery to the car and used the regular motor. coz of the extra power that make it runs faster than b4. i didnt upgraded the motor .so far it still has enough traction.so 尾轆起步不打滑. Only a little 打滑 during 入彎 but not so serious. The steering improved. (it can turn to the end point finally    )  

And like what u said "由於架車設計唔咬地、轉向不足,越係改快就越甩!" so i don't suggest to change the motor.

what kind of model 鋰電 can fit to the car. does all 3.7v Li-ion battery(cell phone or D cam battery ) can use the same charger?

[ 本帖最後由 vrally582 於 2008-8-2 10:33 編輯 ]
8#
Triton 發表於 2008-8-8 13:44:02 | 只看該作者
我直頭改左齒比,用awd個o的齒.........快左1部!!!hahaha!!!
9#
赤鯛 發表於 2008-8-8 13:45:20 | 只看該作者
E架野我覺得改左 都唔多掂....=.=
10#
tomatob 發表於 2008-8-8 15:46:52 | 只看該作者
幾十蚊貨仔,係咁上下架喇,原裝都ok啦,加多粒電已經夠玩
11#
赤鯛 發表於 2008-8-8 22:18:54 | 只看該作者
原帖由 tomatob 於 2008-8-8 15:46 發表
幾十蚊貨仔,係咁上下架喇,原裝都ok啦,加多粒電已經夠玩

不過我覺得HIACE E款殼幾好
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-16 07:30 , Processed in 0.150629 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表