HPI 75T w/ LRP Quantum2 Bullet

HPI 75T w/ LRP Quantum2 Bullet
唔知點解呢 我以上配搭個電變唔夠力推個磨打。初初電變未set好時，開晒控同電變，個磨打會自己行。但set好前後中位後，個磨打反而唔郁，淨係聽到d "deee deee" 聲。試過換電都唔得。但用溫磨打機，2.4V 都郁架。係咪夠電或者個電變唔夠力？
試下再差下舊電先。

[ 本帖最後由 buggy 於 2008-8-15 11:09 編輯 ]

over 60t....u better use 8-9 cells nimh/nicd or 3 cell lipo

[ 本帖最後由 kaho0338 於 2008-8-15 12:21 編輯 ]

should be 75T, right?

one thing you need to know. 6cells is not enough for motor which is higher than 55T.

For those high turn motors...such as 65T,75T....etc.
6cells should be not enough, at least 7-8cell (correct me if i'm wrong)

most people use 3 cells lipo for over 60t motor...think about it

  O! 我以為75t 用少d電添。

Novak super rooster 用唔用到 11.1V Lipo & 75T motor?

http://teamnovak.com/products/esc_specs/rev_specs/index.html

should support 11.1v and 75t