9X2 即係幾多T

9X2 即係幾多T
無刷3.5  =  有刷幾多T

THX~

冇人識

9X2 即係幾多T=2條銅線夾一齊繞9圈


無刷3.5  =  有刷6T或5T甘上下。。。

T=圈數,X2即系用兩條線,9T X 2 即用兩條線繞9個圈

我都問過你看看先

http://bbs.rc-evo.com/viewthread ... ighlight=%2Bsugarso

咁9X2快D
定9T快D

9T單線快過雙線，雙線快過3線…如此類推，不過線數多扭力會比較大

原帖由 chacha 於 2008-9-4 14:40 發表

                               
登錄/註冊後可看大圖

9T單線快過雙線，雙線快過3線…如此類推，不過線數多扭力會比較大

哦原來係咁     
咁我見有D寫10X1  15X1
咁E D右係嘜呢?

即係單線

好多線好多線好多線 , 就快黐線

Q : 9X2 即係幾多T ??

A : 樓上 3# & 4# 嘅師兄已經答咗啦
    2條銅線一齊繞9圈

Q : 咁9X2快D
      定9T快D??

A : 大家都基本上係9T, 咁邊個快.........????????!!!!!!!!!!!!!!!!!!!!!!


咁我想問吓, 9X1, 9X2,9X3  同 9S, 9D, 9T 又係乜呢

9X1=9S , 9 single
9X2=9D, 9 double
9X3=9T, 9 triple
明白未

唔知嗰位師兄明未呢

try not to think 9X2T
but 9Tx2
meaning 9 Turns with 2 Wires
and 9Tx3
meaning 9 Turns with 3 wires
etc...

in theory they should be same speed because they are all 9T(but of course its not quite true)
if it has 2 wires the wires should be 1/2 the thickness ( then 2 wires together will be the same has 1 wire in gauge measure)
if it has 3 wires the wires should be 1/3 the thickness (then 3 wires together will be the same as 1 wire in gauge measure)
etc...

less wire = thicker wire(more punch)
more wire = thinner wire(more linearity)

maybe that will be easier to understand...

明啦  明啦