電容一問

昌記 , 和興 , 永勝 , 華輝.....

原帖由 telry 於 2006-5-23 00:10 發表


係向邊果鋪頭買? 係咪 可以最大受到105 ga 熱度?

係,買一定要買105度,唔好買85度

原帖由 ming 於 2006-5-22 20:49 發表
我係鴨記買10蚊,係kws買一粒ko嘅要60蚊,相差都幾大

咁.....理論上都叫做人家揀過或CUSTOM MAKE呀嗎~!哈~!

原帖由 ming 於 2006-5-23 00:21 發表

係,買一定要買105度,唔好買85度

鴨記果到賣好多都係得果85度,唔係咁好.

同埋牌子都好大偏差下......

最好都係買返NICHICON或RUBYCON.

hi guys i had try a rubycon 105c 3300 16v but its seems cosume more volt and have some delay when you need punch( you can feel it, cause its big difference ), but when i change the ko's one had solve all the problems, and i still don't know why??
And i am using the vfs1 and 7x1 motor

原帖由 teddybear 於 2006-5-25 03:54 發表
hi guys i had try a rubycon 105c 3300 16v but its seems cosume more volt and have some delay when you need punch( you can feel it, cause its big difference ), but when i change the ko's one had sol ...

就係因為電容有所謂充電時間同放電時間O既問題係到.......
唔同MODEL都有唔同O既充放電時間.

原帖由 老人家 於 2006-5-22 23:18 發表
10V太小 , 最小要用16~25V

只揾到這粒，ok 嗎？

sanyo
1500 uf   16v   105。c

uf唔多夠

原帖由 老人家 於 2006-10-17 19:43 發表
uf唔多夠

意思係指儲電唔夠？其實點為之夠？

thank you ~

係-----uf儲電唔夠 , http://www.rc-evo.com/m_newhand/hand004.html