RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2504|回復: 2
收起左側

del

[複製鏈接]
幾粒審 發表於 2010-12-8 22:04:22 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
本帖最後由 幾粒審 於 2014-10-7 10:00 編輯

Del....
taikei 發表於 2010-12-9 07:57:07 | 顯示全部樓層
本帖最後由 taikei 於 2010-12-9 08:07 編輯

回復 1# 幾粒審 Please refer to my attached user manual for reference. Also, Below is some important tips for setting your ESC.

為了使大家更容易明白,可點選下面Video作参考

http://www.youtube.com/watch?v=LPQ8ysHX6ws

Step for setting:



1. ESC must connect with battery

2. Turn on the ESC and
wait 3 seconds

3. Connect with program Box

4. And then can setting with program box.

5. Finished

Step to connect RX/TX:


1. Connect the receiver with ESC

2. Press down and hold the “SET” button (It is side by the switch) and switch on the esc

3. See blue light on then release the “SET” button

4. Set the throttle/ brake lever to full acceleration position (will see the red & yellow lights flash briefly and then illuminated.)

5. Return the throttle /Brake lever fully (will see the yellow & blue lights flash briefly and then illuminated)

6. Put the throttle / brake lever to neutral.(will see the green & red lights flash briefly and illuminated ----The synchronization is completed, all lights off.

7. Switch off the ESC. And you can use it when you switch on the ESC again.

1.jpg
2.jpg
3.jpg
4.jpg
5.jpg
6.jpg
7.jpg
taikei 發表於 2010-12-9 08:00:22 | 顯示全部樓層
con't..............
9.jpg
10.jpg
11.jpg
12.jpg
13.jpg
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-28 19:33 , Processed in 0.096274 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表