標題: Integy Unlimited Class Crawler [打印本頁] 作者: havenlau 時間: 2008-11-1 21:44 標題: Integy Unlimited Class Crawler Integy Unlimited Class Crawler
SSPro Kit and Pro Kit http://www.integy.com/cgi-bin/we ... d=6031&p_catid= http://www.integy.com/cgi-bin/we ... d=5843&p_catid=
MC01
This is the Summer 2008 release rock crawler offered by Integy, super class size 1/8 scale, all metal gears, welded steel rock cage with matte balck coating, large vol. shocks with external oil reservoir, locked differential spool for max. rock crawling capability, huge off-road climbing tires are included, 40 size wheels, multi suspension links provide endless setup possibility, narrow track width setup, 23mm wheel hex adapter, requires radio and electronics, servo saver/horn(s) are not included, can be setup using one front steering servo, can also be setup as 4WS using two steering servos, high torque servo with 250oz-in to 350oz-in is highly recommended, use a Y-servo adapter cable with reverse for 4WS operation for 2-CH operation or use a 4-CH radio system, this pro kit is partial pre-built, expert level building skill is necessary to complete this model, use tiny amount of thread lock on screws to prevent the screws from backing out.
SS01
This is the Summer 2008 release rock crawler offered by Integy, super class size 1/8 scale, all metal gears, ultra low profile gearbox with low CG design, the gear box cases are CNC machined, welded steel rock cage with matte balck coating, alloy shocks, locked differential spool for max. rock crawling capability, huge off-road climbing tires are included, 40 size wheels, multi suspension links provide endless setup possibility, track width = 15.5 inch, wheelbase = 15.75 inch, 23mm wheel hex adapter, requires radio and electronics, servo saver/horn(s) are not included, can be setup using one front steering servo, can also be setup as 4WS using two steering servos, high torque servo with 250oz-in to 350oz-in is highly recommended, use a Y-servo adapter cable with reverse for 4WS operation for 2-CH operation or use a 4-CH radio system, this pro kit is partially pre-built, the front and rear axles are completed at the factory, suspension linkages need to be setup and the axles alignments can be adjusted using linkages and shock positions, expert level building skill is necessary to complete this model, use tiny amount of thread lock on screws to prevent the screws from backing out