Tamiya is proud to introduce the newest member to the R/C family, the Jeep Wrangler. This 1/10 R/C Jeep Wrangler is mounted on the CC-01 chassis and the injection-molded plastic body shell precisely captures its famous form.
About the Model
[LIST]
This is a 1/10 R/C assembly kit model of the Jeep Wrangler which is assembled on the CC-01 chassis.
The Jeep Wrangler’s body is accurately reproduced with an injection-molded plastic shell.
Comes with Tamiya LED Light Unit (TLU-01) and two 5mm dia. white LED lights representing the head lights. You can further light up your Jeep Wrangler by connecting separately available fog lights to your LED Light Unit.
Add Tamiya LED Light Control Unit (TLU-01) Item 53937 for a greater sense of realism.
4WD shaft driven bathtub chassis comes with front double wishbone and rear 4-link suspension.
Mesh wheels match the superb finish of this machine.
Type 540 motor and Electronic Speed Controller (TEU-101BK) included.
Stickers and masking seals included.
2-channel R/C system, battery pack and charger separately required.
Length: 438mm, Width: 195mm, Height: 202mm.
Further customize your Jeep Wrangler with a number of Tamiya’s Hop-Up Options parts.
[/LIST]
Hellipro full series lithium polymer li-po rc batteries packs for Align, e-Flite, Thunder Tiger, Mikado & Esky helicopters. Experience the super heli-power, Hellipro is your only choice!
Item No.: #HP-28459 #HP-28460 #HP-28014 #HP-27916
Capacity (mah): 2500 mah 2500 mah 850 mah 850 mah
Connection 6S1P 3S1P 3S1P 2S1P
Weight (g): 420 g 210 g 69 g 45 g
Voltage (V): 22.2 V 11.1 V 11.1 V 7.4 V
Dimension (mm): 118 x 50 x 34.5 115 x 34 x 25 58 x 30 x 22 13 x 26 x 68
Continuous Discharge Rate: 25 C 25 C 20 C 15 C
Burst Discharge Rate: 40 C 40 C 35 C 30 C
Usage: Align T-Rex 500
Mikado Logo 400 Align T-rex 450
Thunder Tiger
Titan E325 Align T-Rex 250 e-Flite Blade CX2
Twister Hawk
Details:
Item No.: #HP-25737 #HP-25736 #HP-25735 #HP-25734
Capacity (mah): 2200 mah 1200 mah 1000 mah 850 mah
Connection 3S1P 3S1P 3S1P 2S1P
Weight (g): 175 g 105 g 78 g 43 g
Voltage (V): 11.1 V 11.1 V 11.1 V 7.4 V
Dimension (mm): 108 x 34.5 x 23 69 x 35.5 x 21 66 x 35.5 x 19.5 55 x 30 x 15
Continuous Discharge Rate: 25 C 25 C 15 C 15 C
Burst Discharge Rate: 40 C 35 C 25 C 25 C
Usage: Align T-Rex 450
Esky Honey Bee
Belt-CP Esky Honey Bee
King II Esky Honey Bee
FP & CP Esky LAMA
V3, V4, R22
Manufacturer: Hellipro
Where to Buy Hellipro Lithium Polymer (Li-Po) RC flight/ helicopter Battery Products? http://www.rcmart.com/catalog/hellipro-m-304.html作者: Dinballian 時間: 2009-5-14 12:57
Tamiya Spares & Optional Parts Re-Stock!!
ANDERSON Spares & Optional Parts Re-Stock!!!Please check the list below for your desired ANDERSON parts:
Item No.: Description:
MH-258165 13T Pinion Gear For Anderson MB4/MB4 Truggy
258300 Diff. Set For Anderson MB4/MB4 Truggy
258301 Diff. Bevel/Case Set For Anderson MB4/MB4 Truggy
258304 Main Gear (45T) For Anderson MB4/MB4 Truggy
258305 Drive Gear Set For Anderson MB4/MB4 Truggy
258307 Main Chassis For Anderson MB4/MB4 Truggy
258308 Moter Setting Plate For Anderson MB4/MB4 Truggy
258310 Bumper For Anderson MB4/MB4 Truggy
258314 Steering Slider For Anderson MB4/MB4 Truggy
258320 Up Arm mount For Anderson MB4 Truggy
258323 Shock Standoffs For Anderson MB4/MB4 Truggy
258326 Rear Wing Mount For Anderson MB4/MB4 Truggy
258330 2×26.5mm Shaft For Anderson MB4/MB4 Truggy
258331 Front Lower Arm Set For Anderson MB4
258335 Rear Hinge Ball For Anderson MB4/MB4 Truggy
258336 2×37.5mm Lower Arm Shaft For Anderson MB4/MB4 Truggy
258343 Yellow (Mid) Front Shock Spring Anderson MB4/MB4 Truggy
258344 Yellow (Mid) Rear Shock Spring For Anderson MB4/MB4 Truggy
258345 Adjust Spacer For Anderson MB4/MB4 Truggy
258349 Wheels 2pcs (WT) For Anderson MB4
258349B Wheels (BU) For Anderson MB4
258349Y Wheels (YW) For Anderson MB4
258351 Servo Saver Set For Anderson MB4/MB4 Truggy
258369 Front Shock Spring Hard (GN) For Anderson MB4/MB4 Truggy
258378 Tire (Hard) For Anderson MB4
258406 Ball Diff. (F/R) For Anderson MB4/MB4 Truggy
258503 Front Knuckle Arm For Anderson MB4 Truggy
258504 Front Up Arm Set For Anderson MB4 Truggy
258505 Front Lower Arm Set For Anderson MB4 Truggy
258506 Rear Lower Arm Set For Anderson MB4 Truggy
258514 Tire/Foam For Anderson MB4 Truggy
258515 Wheel For Anderson MB4 Truggy
MH-258118 Body Posts
The following TRG Body Kit / Parts for Tamiya F103 are now restocked @ rcmart.com
# TRG2400 - Rear Rubber Tyre Set SURPERION
# TRG5000 - Carbon Printed Diffuser
# TRG5015 - Driver Helmet Set
# TRG5016 - Front Wing Black
# TRG5017 - Rear Wing Black
# TRG5026 - Front Wing White
# TRG5062 - Advance Rear Wing Black
Where to buy ? TRG作者: Dinballian 時間: 2009-5-14 13:01
CROSS Tyres / Wheel / Suspension for Tamiya M-03 Arrived!
The list below are the [B][U]new products from CROSS[/U][/B], including tyres, wheels and suspension for Tamiya M-03. These products are now available @ rcmart.com.
#M03-03 - M03 Suspension Arm Set (Restock Item)
#M03-02B - Mini Wheel Black
#M03-02W - Mini Wheel White
#M03-01R S - Mini Tyre Soft w/R
#M03-01S H - Mini Tyre Hard w/o R
The brand new XRAY (#33000) NT1 1:10 Luxury Nitro TC (2009 Specs) is [U]now in stock @ rcMart.com.[/[/U]b]
XRAY NT1
Developed, designed and styled by legendary, award-winning Dipl. Eng. Juraj Hudy, the XRAY NT1 is exclusively manufactured by XRAY in Europe in the world’s most sophisticated RC manufacturing facility. The pure racing design and premium luxury quality with highest performance create the most sophisticated nitro touring car. Backed by XRAY’s legendary service and support, and showcased at racetracks worldwide by the winning XRAY Factory Team, the XRAY NT1 is taking the nitro touring world by storm.
General
• Developed, designed and styled by legendary Ing. Juraj Hudy, manufactured exclusively by XRAY in Europe in the world’s most sophisticated RC manufacturing facility
• Pure racing design, premium luxury quality, and highest performance
• Premium, exclusive, and high-tech materials used throughout
• The world\’s lowest CG nitro touring car platform
• Unique and revolutionary chassis flex adjustment with optional Multi-Flex™ 1-piece engine mounting system
• Easy access to all drivetrain parts allows super-quick rebuilds and set-up changes
New 2009 NT1 Specs:
• included optional XRAY aluminum racing shock bodies
• included optional HUDY Spring Steel™ front & rear CVD driveshafts
• new wider 2-speed 2nd gear for increased durability & lifespan
• new reinforced & improved suspension parts
• new wider central drive belt for increased durability & lifespan
• new fuel tank pressure cap with 1-pc profiled seal for perfect fitment
• new steering servo mount for mid size servos
• new top deck mounts for mid size servos
• new belt tensioner holder for improved belt tension adjustment
• new updated radio plate
• new harder 2-speed springs
For: T-rex 500 / Mikado Logo 400
Capacity: 2500mAh
Number of Cells in Series: 6 cells
Connection: 6S1P
Voltage: 22.2V
Continuous Discharge Rate: 25C
Burst Discharge Rate: 40 C
Dimension: 118 x 50 x 34.5 mm
Weight: 420g
The brand new Yokomo BD5 1:10 EP Touring Chassis Kit has just arrived the rcMart.com. Do not miss it due to limited stock.
Yokomo BD5
It is not easy to make “It is possible to win” machine in a modern race scene advanced by making to high-speed. Only the machine by which various drivers obtain the highest result in the race however because it is a performance “It is possible to win” that we [yokomo] thinks about it is not only a speed of the lap time of one time, even the maintenance when the stability and maintaining it it is possible to put it driving is considered.
Number of previous work has ever won the title of the BDM, BD5 more than necessary for the performance anymore. The difficulty to explore the unknown in the earlier part of the vertex, and required a long development period and to be exceptional. It is well-honed performance DNA touring the state of the art scene, usually in 20 minutes of running and often-contradictory stability, be ready for the race team of high-end, been a general improvement in exercise performance
The main specification
- Belt drive 4WD
- 4 wheel independent double-wishbone suspension
- Newly designed suspension arms
- Newly designed knuckles and hub carriers
- Newly designed eccentric belt tensioners
- Newly designed large capacity oil shocks
- 2.5mm carbon graphite main chassis
- 2.0mm carbon graphite symmetrical upper deck
- 3.5mm carbon graphite front and rear shock towers
- Rear ball differential
- Lightweight aluminum diff housings
- Front and rear sway bars
- Titanium turnbuckles
- Strengthened body posts
- Front and rear machined aluminum bulkheads
- Front and rear aluminum suspension mounts
- Aluminum steering arm and plate
- Newly designed universal drive shaft
- Front one-way
The Futaba 4VWD Superb 4-channel control for surface models now in stock @ rcMart.com.
Futabu 4VWD
Turn the turrets and fire the cannons on your Tamiya tank. Maneuver a Tamiya big rig with forward, reverse AND brake. Command your battling robot to engage in exciting combat. Or add more functions to a scale boat for more realistic performance. Whatever type of surface model you have that requires three or more channels of operation, the 4VWD radio from Futaba can handle it. It’s designed specifically to deliver incredible control for more advanced surface models — and it’s surprisingly affordable as well!
Trims and servo reversing functions on all four channels help you control the action.
Adjustable length and tension on the sticks let you customize them to your personal specs.
A meter on the easy-to-grip case continuously displays transmitter battery power status.
rcMart is now offering a FREE Tire Bag Set Combo. Customer can get A set of FREE Yeah Racing (#YA-0192) Tire Bag by purchasing 5 pairs of 26mm GRP foam tyres @ bargain price USD $39.90. Hence, click the link below to get your RC car a brand new set of new tyres.
The Yeah Racing Aluminum Spur Gear Stand is designed to hold the spur gear for easy storage. It can hold up to 10 x spur gear and compatible with all of the Spur Gear for 1:10 or 1:12 RC cars. The top of the stand could be fastened with a body clip to hold the gear securely. Furthermore, a rubber strip attach to the body clip for easy pulling out the body clip.
The Yeah Racing Aluminum Spur Gear Stand Arrived!
Features:
- Body fasten on the top of the stand to hold the spur gear securely
- Rubber strip attach to the body clip for easy pulling
- Hold up to 10 x Spur Gear
- Material: Aluminum
- Base Diameter: 15mm
- Post Diameter: 9mm
- Length: 61mm
- Color: Blue
MOPED V16R ESC (Bravo) is now restocked @ rcMart.com. With all the brilliant features and selling at a low price, it is not a surprise that most of the rcMart customers rated the MOPED V16R ESC (BRAVO) a 5 stars rating. Furthermore, this MOPED V16R ESC (Bravo) also being improved by a larger built-in heat sink to cool the MOSFET and THE PRICE REMAINS THE SAME!!
Specifications:
(RDS ON) In OHM At 25℃: 0.000032Ω
Impulse Current of MOSFET’s: 1980A
PWM Frequency: 2K-4KHZ
Turns: For 10-36 turns motor
BEC Output Voltage: 5.0V (3A)
Features:
Large built-in heat sink to cool the MOSFET (New Feature)
Power boost circuitry maintains steering-servo voltage when battery power drops
4KHz switching smooth throttle response
Smart braking
Automatic brake(ABS)
Real-time braking
One-touch push button setup with LED for easy programming without requiring external devices
100% digital circuitry
Heavy-duty power wires
External solder tabs
Quick start circuitry
BCE voltage regulation
Incredibly low resistance for higher speed and minimal power loss
Lightweight and small enough to fit anywhere
As we mentioned previously, Hong Kong based Yeah Racing have finally released their F103 rear motor block. Machined from a single piece of aluminium, the black anodized rear pod is super stiff and because its machined all the holes align perfectly for ultra smooth performance. Suitable for the Tamiya F103RM / LM & 15th Anniversary chassis’ it has multiple rear wing mounting points and comes supplied with all the required fasteners.
Source: RedRC
Where to buy ?
Yeah Racing (#F103RM-006BK) Aluminum Knuckle Arm & Servo Saver Set (1,2,3 deg) (BK) for Tamiya F103RM http://www.rcmart.com/catalog/rc ... -f103r-p-28562.html作者: Dinballian 時間: 2009-5-18 10:42
Hobbywing Ezrun 18A and 60A Brushless ESC System Restock!
Hobbywing Ezrun series Brushless Sensorless ESC 18A (For 1/18 Car) & 60A (For 1/10 Car) System Set has been restocked @ rcMart.com. These ESC System Set are the latest version from Hobbywing (*Version 2 - USB Supported with the Hobbywing Program Box) .The ESC also comes with a flash design sticker and a new program card. Please click the link below to visit rcMart.com for more details.
* Click the link for more details of the Hobbywing Program Box http://www.rcmart.com/catalog/rc ... rogram-p-28748.html
Specifications of the new Program Card
1.1 Size: 88mm (L) * 58mm (W) * 14mm (H)
1.2 Weight: 40g.
1.3 Input Voltage: 4.8-6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program card)
The programmable items of LED_PC2C (Available for XERUN and EZRUN series car ESC of Version2)
#1 Running Mode
#2 Drag Brake Force
#3 Low Voltage Cut-Off Threshold
#4 Start Mode
#5 Maximum Brake Force
#6 Maximum Reverse Force
#7 Initial Brake Force
#8 Throttle Neutral Range
#9 Timing
#10 Over-Heat Protection
#11 Motor Rotation
#12 Lipo Cells
(Note: The item #11 and #12 are not available for XERUN series ESC of Version 2, they only available for EZRUN series ESC)
The latest Hobbywing XERUN Series brushless 120A (Competitive Race) & 60A ESC (*Version 2 - USB Support with the Advanced 2 in 1 Professional LCD Program Box) and Advanced 2 in 1 Professional LCD Program Box has just arrived rcMart.com.
Features of the Hobbywing XERUN 60A and 120A ESC:
- Supports sensored and sensorless brushless motors, and seamlessly changes to sensorless working mode when the sensor cable is broken.
- Use top quality electronic components such as IRTM (USA) super MOSFET and RubyconTM (Japan)lowest resistance capacitor etc. to enhance the current endurance ability of the ESC.
- Supports 2-3 cells Lipo or 4-9 cells NiMH/NiCd battery pack.
- Excellent start-up, acceleration and linearity features.
- 3 running modes (Racing mode, Reverse mode and Rock crawler mode)
- 4 steps of maximum reverse force adjustment. - Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
- 9 start modes (Also called “Punch”) from “Very soft (Level 1)” to “Very aggressive (Level 9)”.
- Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection /Throttle signal loss protection / Motor blocked protection.
- 8 steps of timing adjustment, and you can use this programmable parameter to adjust the timing value even for sensored brushless motor, while for ESC from other manufacturers, you must turn the rear cover of the motor to change the timing value.
- Easily program with only one button and compatible with pocket-sized program card.
- Firmware can be online updated through an USB adapter on the advanced LCD program box.
This Advanced Program Box is used to set the programmable parameters of brushless ESC, it has a 16*2 characters LCD (Liquid Crystal Display) to get a friendly user interface, so you can set the programmable parameters very easily. It is pocket-sized, so you can bring it to the racing or flying field conveniently. This program card is suitable for the following ESCs: 1. XERUN Series Car ESC (Version 2.0) 2. EZRUN Series Car ESC (Version 2.0) 3. PLATINUM Series Helicopter/Aircraft ESC
1 Working Mode
1.1 Working as an individual device to set the ESC, the value of each parameter is displayed on its own LCD. 1.2 Working as an USB adapter to link the ESC with a PC, and the user can update the firmware of the ESC or set the ESC by the special application software on PC.
2 Specifications
2.1 Size: 90mm (L) * 51mm (W) * 17mm (H)
2.2 Weight: 84g.
2.3 Input Voltage: 4.8-6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box)
3 Programmable Items
A) The programmable items for the CAR ESC are:
3.1 Running Mode
3.2 Drag Brake Force
3.3 Low Voltage Cut-Off Threshold
3.4 Start Mode
3.5 Maximum Brake Force
3.6 Maximum Reverse Force
3.7 Initial Brake Force
3.8 Throttle Neutral Range
3.9 Timing
3.10 Over-Heat Protection
3.11 Motor Rotation
3.12 Lipo Cells
B) The programmable items for the AIRCRAFT AND HELICOPTER ESC are:
3.1 Brake Setting
3.2 Battery Type
3.3 Low Voltage Protection Mode (Cutoff Mode)
3.4 Low Voltage Protection Threshold (Cutoff Threshold)
3.5 Start Mode
3.6 Timing
3.7 Governor Mode
3.8 Motor Type
3.9 PWM Frequency
3.10 Built-In BEC Output
3.11 Motor Load
3.12 Lipo Cells
4 Application Software of the Advanced Professional LCD Program Box
Have you ever think about the possibility of converting the TT-01 / TT-01E to a M-Chassis car? No worry, because 3Racing has did it for you. The M-Chassis conversion kit for TT-01 / TT-01E is the kit to convert the 1:10 TT-01/ TT01E into a 1:10 M-Chassis. Sure you will have more fun and of course more choices to modify your TT-01 / TT-01E with this conversion kit.
The 3Racing (TT01-38/FRP) M Chassis Conversion Kit For TT-01 / TT-01E New Arrival on rcMart. 3Racing (TT01-38/FRP) M Chassis Conversion Kit For TT-01 / TT-01E
Description:
Modify Tamiya TT01 to M Chassis
* Wheel Base Adjustable from 210-224mm
* FRP Chassis & Upper Deck
* Aluminum Motor Mount
* 4 Dog bones & Main Shaft
* Extra Long Body Post
* Velcro Battery Socket
* Ball Bearing Steering Track
About the Model
The Mercedes-Benz Unimog’s body is made from lightweight polycarbonate material.
CR-01 chassis features a heavy-duty ladder frame with strong lightweight pressed aluminum channels and cross channels.
4 link coil suspension provides the flexibility needed to conquer difficult rocky terrain.
Center gearbox features planetary gears with a compact design enabling the battery to be mounted lower for a better center of gravity.
Newly designed 3-piece beadlock wheels mounted with massive 125mm diameter and 6mm wide rock crawler tires are ready for any terrain.
Powered by a 540 motor.
Can be fitted with Yellow (Front) and Red (Rear) TLU-01 LED Lights (ITEM 53909)
The Unimog is compatible with a wide range of Option Parts
ELECTRIC KITS REQUIRE:
(unless stated differently above)
Radio: 2-Channel with servo(s)
Battery: 6-cell flat with standard Tamiya connector
Charger: AC/DC timed or peak for 6-cell battery
Paint: PS for Polycarbonate/TS for ABS
Misc. Items: Building and track equipment
The Yeah Racing 64P Spur Gear Super Bundle Set include 10 pcs of spur gear (in 4 different sets from 88T to 126T) plus the EXCLUSIVE Aluminum Spur Gear Stand. rcMart.com is now offering a HALF PRICE DISCOUNT for this perfect matched Super Bundle Set. The 4 options of the Spur Gear in the Super Bundle Set include (88T-93T), (93T-102T), (103T-113T) and (114T-126T). With the Super Bundle Set you can now have a handy spur gear stand for storage and the desire range of 10 x spur gears ALL IN ONE GO at low price.
Spur Gear 64 Super Bundle Set with Aluminum Stand Content:
# Yeah Racing Super-Precise Spur Gear 64P: (10pcs in total)
# Yeah Racing (#YA-0196BU) Aluminum Spur Gear Stand x 1pc
Description:
# The Yeah Racing Aluminum Spur Gear Stand is designed to hold the spur gear for easy storage. It can hold up to 10 x spur gear and compatible with all of the Spur Gear for 1:10 or 1:12 RC cars. The top of the stand could be fastened with a body clip to hold the gear securely. Furthermore, a rubber strip attach to the body clip for easy pulling out the body clip.
Feature:
# For: Spur Gear
# Material: Aluminum
# Color: Blue
# Body fasten on the top of the stand to hold the spur gear securely
# Rubber strip attach to the body clip for easy pulling
# Hold up to 10 x Spur Gear
Specification:
# Base Diameter: 15mm
# Post Diameter: 9mm
# Length: 61mm
Include:
# Aluminum Spur Gear Stand (1 Pc)
# Body Clip (1 Pc)
# Rubber Strip (1 Pc)
*Photos for reference only, radio/transmitter and accessories are NOT INCLUDED
rcMart would like to Thanks to the RC fans of supporting the Yeah Racing (YA-0099) Radio-K Aluminum Carrying Case. Due to the enthusiastically response of this radio carrying case, the radio carrying case was out of stock recently. Don’t worry for the customers still looking for this item, it has been RESTOCKED. Please visit rcMart.com to get it NOW.
The Yeah Racing Radio-K Aluminum Carrying Case Series designed to fit various range of radio such as Futaba, Spektrum, it can protect your transmitter from damage, and have custom-fit foam padded interior. The custom-fit foam is pre-cut and flexibly to fit your radio in a perfect position. The custom-fit foam provides plenty of room for other RC accessories storage as well. It’s easy carrying with light-weighted material.
For: Futaba 4PK, Spektrum DX3R / DX3S- Material: Aluminum & ABS Plastic (with Foam)
- Color: Black
- Aluminum and High Quality Plastic Hard Outer Shell with Finished and Stippled Surface.
- Custom-Cut Foam Component to Fit the designated Stick Radio and Accessories.
- Layers of Foam with Storing Space for Accessories.
- High Density Foam to Protect the Products.
- Secure Latches.
- Comfort Handle.
Yeah Racing Radio-K Aluminum Pistol (Wheel) Radio Carrying Case (#YA-0099)- Inner Size: 360 x 200 x 170 (For Spektrum DX3R / DX3S, Futaba 4PK)
gp_tc302-b1_0331 GP Battery Li-Po Racing Car Pack 7.4V 4300 Series - Restock
Brand new GP Batteries (#TC302-B1) Li-Po Racing Car Pack 7.4V 4300mAh Series has arrived rcMart.com
- EFRA Approved Battery
- Voltage: 7.4V
- Capacity: 4000mAh
- Discharge Rate Continuous: 35C
- Dimension: 137.81mm x 46.38mm x 23.42mm
- Weight: 232.1g
The Tamiya (#58367) F103GT 1:10 Chassis Kit is going to be in stock at rcMart.com on 29th, May. rcMart.com welcome the customers to pre-order this item as soon as possible as there are many RC fans looking for this high performance racing car.
Direct Drive System Allows Realistic Control!
Relive the experience of pure driving pleasure, with this high-performance 2WD chassis. Direct Drive transmission system coupled with advanced tires allows the ultimate in precision control. Based on our ever-popular F103 chassis, this chassis features newly designed front upright and wheel mounts, allowing it to utilize touring car wheels and body. Chassis can also make use of a wide variety of option parts to further improve and tweak performance.
About the Model
* Front suspension: ITEM 53258 Formula Link-Type Front Suspension (newly designed front upright)
* Rear suspension: T-Bar System (newly designed Rear wheel axles)
* Tire: ITEM 53220 Super Slick Tires (4pcs)
* Chassis may use any 1/10 Touring Car body (excluding short wheelbase type).
* Chassis weight of 700g is much lighter than 4WD touring cars, allowing greatly increased running time.
Are you always stress about missing the important screws/parts when tuning up your RC cars/helicopters?
Why don’t you get our brand new Yeah Racing (#YA-0194) Multi-Purpose Mini Box! It definitely helps to tidy up the screws/parts storage ideally. It provides 2 movable plastic plate for multiple partition therefore you can store the screws/parts in a more convenient way. It is also small in size so you can tune the RC while in race track or even on your desktop without losing your screws/parts. The Yeah Racing (#YA-0194) Multi-Purpose Mini Box arrived On rcMart.com !
Features:
- Ideal for screws/small parts storage
- 2 movable plastic plates for multiple partition on various use of storage
- Size: 86mm(L) x 55mm(W) x 20mm(H)
- Color: Black
- Material: Plastic
For those Offroad RC fans who are waiting for the Tamiya (#58380) 1:10 DF-03 Keen Hawk Buggy and now, here is a good new for you. The DF-03 Keen Hawk Buggy will be restocked @ rcMart.com on 29th, May. Pre-order id available from now, be hurry~~
Developed using actual racing data, the DF-03 4WD Racing Buggy Chassis now receives its second body style. Following on the popular Dark Impact, which featured a black-colored agressive appearance, Keen Hawk sports a sleek, futuristic and “heroic” appearance. The durable monocoque chassis provides contortion resistance with a drive-train layout that features a propeller shaft arranged in the center for optimum center of gravity for excellent balance. Combined with the multi-adjustable 4-wheel double-wishbone suspension, it is a force to be reckoned with at the track.
About the Model
* High performance 1/10 4WD buggy assembly kit designed for off-road racing
* Includes white-colored Large Dish Wheels and High Density Spike Tires (GRP compound K) for excellent control and running on dirt tracks.
* Front and rear compact & sealed gearboxes equipped with ball differentials for traction on any surface
* Full ball bearings included for maximum drive-train efficiency
* 4-wheel independent double wishbone suspension features CVA oil dampers and extra long suspension arms for improved stability and handling
* Includes type 540 motor
* Requires Electronic Speed Controller (sold separately)
The hottest Traxxas Monster / Race 1:10 EP / GP Trucks are NOW AVAILABLE at rcMart.com. Models including - REVO 3.3 (5308), T-MAXX3.3 (4908), E-REVO (5605), SUMMIT (5610), E-REVO Brushless Edition (5608), SLASH (5805). If you do not want to miss the chance of getting any of those Traxxas Truck, please visit rcMart.com for your desire truck now.
Please check the list below for the Traxxas Monster / Race Truck that coming back to rcMart.com stock:
- REVO 3.3 (5308) 1:10 Scale 4WD Monster Truck Gas Power (Arrived)
- T-MAXX 3.3 (4908) 1:10 Scale 4WD Monster Truck Gas Power (Arrived)
- E-REVO (5605) 1:10 Scale 4WD Monster Truck Electric Power (Arrived)
- SUMMIT (5610) 1:10 Scale 4WD Extreme Terrain Monster Truck Electric Power (Arrived)
- E-REVO Brushless (5608) 1:10 Scale 4WD Brushless Monster Truck Electric Power (Arrived)
- SLASH (5805) 1:10 Scale Pro 2WD Short Course Race Truck Gas Power (Arrived)
TT01 having the glamour to attract a wide range of 1:10 touring car RC fans, and now it can even convert into a 1:10 M-Chassis for much much more fun and excitement with the M-Chassis Conversion Kit. However, the car is not being ready striaght away with the conversion kit only. If you do not want to wait for any longer, please have a look at this SUPER VALUED COMBO OFFER @ rcMart.com. This Combo Set including all of the hop ups parts from Tamiya, 3Racing, Yeah Racing & Moped to assemble a TT01 M-Chassis ARTR version, therefore you can start playing it immediately with the remaining RC components being installed without the second time research and shopping for the TT01 M-Chassis. Furthermore, you can save up to 33% by getting this combo.
Description:
These are the 3 Racing M Chassis ARTR Kit, modifly Tamiya TT01 to M Chassis. The ARTR Kit Just add your choice of electronics & body.
RC 1:10, Car,Electric-Powered, On Road, Almost-Ready-To-Run ARTR
Features:
Modifly Tamiya TT01 to M Chassis
Wheel Base Adjustable from 210-224mm
FRP Chassis & Upper Deck
Aluminum Motor Mount
4 Dog bones & Main Shaft
Extra Long Body Post
Velcro Battery Socket
Ball Bearing Steering Track
19 items included
Include:
3Racing (#TT01-38/FRP) M Chassis Conversion Kit for TT-01/TT-01E x 1 Set
3Racing Alum. King Pin Shim For TT-01 (LB) x 1 Set
3Racing Graphite Shock Tower Mount For TT-01E x 1 Pc
MOPED Electronic Speed Control ESC V16R (Bravo) x 1 Pc
Tamiya P Parts (Servo Horn) For TT01 x 1 Pc
Tamiya G Part (Gear) For TT01 x 1 Pc
Tamiya Drive Shaft Set (TT01) x 2 Sets
Tamiya Bevel Gear Set For TT01, TGS x 2 Sets
Tamiya Servo Saver High Torque Type x 1 Set
Tamiya Type-E (A Parts) For TT01 x 2 Sets
Tamiya 2×8mm Pins x 2 Sets
Yeah Racing Aluminum F/R Propeller Joint (BU) For TT01 / TT01E x 1 Set
Yeah Racing TT01 Bearing Set x 1 Set
Yeah Racing 3×8mm Round Head Titanium Screws x 1 Set
Yeah Racing 2×8mm Round Head Titanium Screws x 1 Set
Yeah Racing 55mm Damper Set (TI) for 1:10 Touring x 4 Pcs
Yeah Racing 3mm Aluminium Flanged Lock Nut (BK) x 1 Set
Yeah Racing 4mm Aluminium Flanged Lock Nut (PP) x 1 Set
Yeah Racing 1:10 Mini High Realism 6-Spoke (PP) Wheel Set x 1 Set