RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: my f109 ... finished [打印本頁]

作者: abcde 時間: 2009-9-19 00:27
標題: my f109 ... finished
本帖最後由 abcde 於 2009-10-26 13:06 編輯

my f109....
完成了大部份.....感覺幾好....如果以價錢和質量來比較, 對我來說....有90分了
加上是香港製造....所以很滿意
但是還有改善空間的....某些膠料可用一些較硬材料...相信會好一點

作者: rk2 時間: 2009-9-22 18:06
did you put it to the track yet ?

作者: abcde 時間: 2009-9-22 20:47
i still not finish ar.....still finding cheap low profile servo..

作者: abcde 時間: 2009-9-24 00:08
3# abcde

finally ....i bought a cheap low profile servo from rcmart....but due to it little bit longer..so need small modify
then...i need think which colour of my f109 paint and where find decal

作者: abcde 時間: 2009-9-24 13:09
no la.....not finish the body yet...

作者: fyin 時間: 2009-9-24 13:28
Hi Bro,
this F109 wheel base is same as F103??
you can use F103 body to run first.

作者: mancar123 時間: 2009-9-27 14:02
f109 係最新?

作者: gimsink 時間: 2009-9-28 11:03
my 109 also almost finish, now need to paint the shell.
Only use TPESC and fan black pig, try run in football court, very funny wor, speed fast enough for fun, not bad....running very quite. But the spur gear very noisy when reverse run, don't know why ?? ching have any idea ?????
[attach]305102[/attach][attach]305103[/attach]

作者: 一匹狼 時間: 2009-9-30 22:16
想問下...F109個LOOK
O岩做咩車隊或者咩車花??

作者: 一匹狼 時間: 2009-10-1 00:09
個TPESC咁大...裝吾裝到車殼呀=0=

作者: abcde 時間: 2009-10-1 13:01
finally ...finish and can test.....
use GWS low profile servo
hobby wing 35A ESC
3000KV motor...gear 98/19
small modify to fit the old body..(due to new one still not paint)

作者: abcde 時間: 2009-10-3 01:25
13# abcde
yesterday...test run in wan chai....due to use 3racing org tire...not underbridge ghost tire or tamyia C type tire....so very hard to control....also find out the must change parts..the rear is too soft...the side spring is too soft ...almost nothing...so change spring i think is a must....
next time will use tamyia c type tire and hope to have a better control....

作者: abcde 時間: 2009-10-8 09:54
test report again
yesterday go to wan chai test again, using tamyia C type tire with a better control under the bridge.....however...after one battery....the car suddenly stop....after check....the low profile GWS servo broken....don't know why when plug in ...all the electric don' work....when remove the 3 wire plug...the ESC and receiver resume normal...my comment is....DON'T BUY GWS again....but i can't find any cheap low profile servo.....the servo only play 2 time and with 3 battery....sign.....
about the f109...after using a more hard rear side spring...the 回中 become better and the car control is simlar as f103 but with a longer chassic....

作者: fyin 時間: 2009-10-8 18:08
Hi Bro,
我"橙"過你, 我燒咗隻hitech 5945MG成4xx架.
裝咗上1/5 F1 向屋企試過一次就死咗.
前日問永利有冇得維修, 原來已經停產咗冇得整....唉

作者: gimsink 時間: 2009-10-9 11:56
what reason burn servo ? I only use cheap cheap Towerpro MG995 on F109 and played more than 15 packs battery, no problem wor.....

作者: fyin 時間: 2009-10-9 16:13
MG995 out of stock!

作者: abcde 時間: 2009-10-9 18:29
17# gimsink
i don't know la....just change back use 3003...will test again later....

作者: abcde 時間: 2009-10-9 18:31
16# fyin
sign...burn a $4xx servo really too bad
i don't know bought another low profile or just cut ear and not use those blue screw ...

作者: abcde 時間: 2009-10-13 21:24
test today again in wan chai....use 3003 servo and finally finish all my 4 pack battery
the org 98t xeron spur finish his life today...and i just have a 106t 64 pitch kawada...then..106/21....hobby wind 35A 3000kv...the control better then before...it may be more soft startup in the slipper track is better then rocket speed..
about the f109..it more like my old f103 control...although it longer then f103..but still good ...the front arm...i think i will change back to tamyia....and i almost finish my body la...

作者: abcde 時間: 2009-10-13 21:28
本帖最後由 abcde 於 2009-10-13 21:32 編輯

22# abcde
body photo....now need make the head....

作者: abcde 時間: 2009-10-13 22:18
23# abcde

i am my friend will play f1 on coming sunday PM in wanchai underbridge...other wanchai fans who have f1..pls join us have fun...

...i sure...more car ...more fun

作者: gimsink 時間: 2009-10-14 09:55
abcde-san, have you seen my lap-sap shell in the other post ? really heven and hell....

作者: abcde 時間: 2009-10-14 10:02
25# gimsink
yours also not bad ar...see full (though) ma....
if have time...play at wan chai on sunday afternoon ar....but need use tamyia C type tire or underbridge ghost tire....org 3racing tire can't run at there....

作者: abcde 時間: 2009-10-21 16:38
26# abcde
finish my driver, update some photo

作者: amzta14797 時間: 2009-10-21 16:49
MG 995 係極x 隔離個間野好似有(好多)

作者: abcde 時間: 2009-10-21 18:46
28# amzta14797

sigh....the body hole and the body cutting is not fit...why 3racing f1 body..not fit the 3racing f1...i think they really need to improve and make one before selling out...

作者: super645n67 時間: 2009-10-22 19:09
very good yollow color

作者: abcde 時間: 2009-10-23 12:46
31# 3rock

thx....will play on sunday ?

作者: fyin 時間: 2009-10-23 16:38
Hi Bro,
Very Very Good work in F1 body wor.

作者: abcde 時間: 2009-10-23 20:14
when will you come back to play RC ar....buy hpi ften la...it cheap and good run ...and have good look body....and you can use your f201 form tire.....

作者: chiwingedwinlo 時間: 2009-10-23 22:04
abcde c-hing, which type/brand of rear side spring you chose for replacement ?

作者: abcde 時間: 2009-10-24 00:31
本帖最後由 abcde 於 2009-10-24 00:33 編輯

I just cut some old spring at home..will wait 3racing option for test but still not in market yet

作者: abcde 時間: 2009-10-26 13:15
test yesterday....finally play it with 3racing f1 body and 3racing f1 chassic....
the handling is good ....i just replace the front arm to tamyia because the org one really "............." hope 3racing can improve the design of their A arm...also thank 3rock help me to adjust the gear because i alway lose the gear....
the overall performance is good ...now need to find the 31mm king ping for the tamyia fix A arm and better gear ratio for playing at wanchai...
i use hobbywing 35a esc with 13T 3000kv motor...gear 104/23 BY energy lipo 25c 3500mah

作者: abcde 時間: 2009-11-2 22:46
me and my friend will play f1 on coming friday in wanchai underbridge, hope other ching can join us have fun....we now have f109, f104,techf108, hope to see f103,hpif10 other type f1 play
date : 6/11/09
time :7:30pm
need: underbridge ghost tire for f1 or tamyia type C f1 tire (due to track of wanchai underbridge)
Also welcome other 2wd like 1/12, pro10...or f103GT....

作者: fyin 時間: 2009-11-3 09:37
OK, I can come, how about 3 rock & James??

作者: abcde 時間: 2009-11-3 13:17
40# fyin
i don't know james ar....i just send sms to everyone....hear he go to shanghai ...don't know come back or not...
you play f201 or f102 ?

作者: chiwingedwinlo 時間: 2009-11-3 14:49

13# abcde
yesterday...test run in wan chai....due to use 3racing org tire...not underbridge ghost tire or tamyia C type tire....so very hard to control....also find out the must change parts..the r ...
abcde 發表於 2009-10-3 01:25

登錄/註冊後可看大圖

C-hing, where can buy the optioned spring for side rear ?

作者: abcde 時間: 2009-11-3 20:10
43# chiwingedwinlo
i don't know it can buy on market or not......read 3racing web site it still say coming soon......if it release...i think most have 3racing -part shop can buy.....

作者: bigheman 時間: 2009-11-12 11:58
Great report!! Am going to get F109 very soon!!! Can it use standard size servo?

作者: bigheman 時間: 2009-11-12 12:00
Hi Ching, also I like the LED at the back of the car, I remember Tamiya use to make a break like kit, which I used to have on my veyr old F103. Can we still buy them??

Cheers!!

作者: abcde 時間: 2009-11-12 12:33
47# bigheman
yes..it can use normal servo like f103...also the rear wing have hole to store the LED

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)