RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: HOW TO REPAIR: RIDE and Tamiya Rubber and Rims Wheels [打印本頁]

作者: nel3838 時間: 2011-3-29 23:18
標題: HOW TO REPAIR: RIDE and Tamiya Rubber and Rims Wheels
本帖最後由 nel3838 於 2011-3-29 23:27 編輯

C-Hing moon, Just to share experience.

As F1 Tamiya and RIDE rubber tyre "wheel rims" are quite brittle (easily cracked), making tyres life much shorter. Here is a method that I experimented should save your broken tyres hopefully

When the rubber and rim start to split, I used Lexan Car body Repair Glue (can buy in any RC car shop in KWS) to apply around the join between the rim and the rubber. It does not look nice but it works very well. I tested this technique on both Tamiya Rubber tyre and RIDE rubber tyres, as rims from both brands are brittle (easy to crack). See photos below, I used the tamiya tyres to end of life....

.

Once the glue dries, because it is slightly flexible, it stretchs a bit with tyres. So far all my repaired tyre/rims worked to the end of life the tyres (worn till hole comes thru), and no more "re-glue" required after each play. So far so good

Hope this helps all...

, let me know if anyone is successful with this technique too.... be interested to know.

[attach]480558[/attach][attach]480559[/attach][attach]480560[/attach][attach]480561[/attach]

作者: yiuyiu8607 時間: 2011-3-30 00:31
CHING,
請問呢支Lexan Car body Repair Glue
大約幾多錢?!

作者: yiuyiu8607 時間: 2011-3-30 00:37
同埋呢個方法唔知適唔適合其他車種呢?!
1/10 ON ROAD
1/10 OFF ROAD

作者: nel3838 時間: 2011-3-30 06:19

同埋呢個方法唔知適唔適合其他車種呢?!
1/10 ON ROAD
1/10 OFF ROAD
yiuyiu8607 發表於 2011-3-30 00:37

登錄/註冊後可看大圖

Around $60, and I only tried it on F1 rubber tyres. Not sure if you need it for 1/10 on road as those tyres usually dont have the split/crack problems.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)