加州剪影 - TWIN CONDOR

原帖由 jpmontoya2 於 2006-11-14 14:22 發表


My one is M-tronik...from Germany i think

Powering two 700 BB turbo motors with 9.6V

The other CONDOR is using the 2 indivdual ESC to push the 700 motors,

M-Tronik is UK product ar, MOMO.

好靚呀!~

No....direct supply....it was a kit from Robbe, so basically just hook up the PCB (small one)..and it will create a sound that is similiar to the boat horn~~

原帖由 jpmontoya2 於 2006-11-14 02:22 PM 發表


My one is M-tronik...from Germany i think

Powering two 700 BB turbo motors with 9.6V

The other CONDOR is using the 2 indivdual ESC to push the 700 motors,

I see, thanks.

i found interesting when i saw the MSC inside.

at first, i also guessed that stupid MSC is for the horn, how you power supply the MSC, individual power supply?

原帖由 Mobility(雲) 於 2006-11-14 14:10 發表
So what's your ESC and motor??

My one is M-tronik...from Germany i think

Powering two 700 BB turbo motors with 9.6V

The other CONDOR is using the 2 indivdual ESC to push the 700 motors,

So what's your ESC and motor??

原帖由 Mobility(雲) 於 2006-11-14 14:04 發表



what ESC and motor are you using?

i saw one of it is not using ESC but MSC

Both of the boat are using ESC....the MSC you saw on my boat is just for the horn~~~..

Here are some more picture taken by RCman of the Condor Twins~

原帖由 jpmontoya2 於 2006-11-14 02:01 PM 發表


You are right~~~~

what ESC and motor are you using?

i saw one of it is not using ESC but MSC

原帖由 SPOONACCORD 於 2006-11-14 13:01 發表
啦ｂａ有咩用～？

響按~~~

船都有架~

原帖由 Mobility(雲) 於 2006-11-14 13:02 發表
one of it from jpmonyota?

You are right~~~~

one of it from jpmonyota?

啦ｂａ有咩用～？

真既一樣，不過鶴山號仲正。。。

good!