RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2168|回復: 11
打印 上一主題 下一主題
收起左側

Lipo question

[複製鏈接]
跳轉到指定樓層
1#
mlee 發表於 2009-6-25 22:52:02 | 顯示全部樓層 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Hi All,

I have a ip lipo 4000, 25c for about 3 months, last night before I play, I read S1 has zero volt!  S2 has 7.78V!!!!  Any brother has experience about this?  Most importantly, can this battery be fixed or should I dispose it?

Thanks.
2#
 樓主| mlee 發表於 2009-6-26 07:14:39 | 顯示全部樓層
2# Challenager

I have tried, however, the charger is telling me battery error...
3#
 樓主| mlee 發表於 2009-6-26 08:07:05 | 顯示全部樓層
本帖最後由 mlee 於 2009-6-26 08:08 編輯

4# Noir.KAZE

Yes, it does not make sense.  but mini lipo reader measure other lipos reading are normal....   The balance charger cannot charge this battery either...
4#
 樓主| mlee 發表於 2009-6-26 08:25:11 | 顯示全部樓層
6# Noir.KAZE

Really beat me....  Need to go to KWS tonight to get another pack la...
5#
 樓主| mlee 發表於 2009-7-3 00:55:59 | 顯示全部樓層
I disassumbled the battery and found that one of the balancing wire were loosen.  Both red and black are good=> that is why total voltage is showing 7.7V.  The blue wire was detached from the battery, the battery is back in action after some soldering.  The only thing to do is to glue to casing back together.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-18 01:13 , Processed in 0.098189 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表