FF03 波箱齒 problem

有鬼佬網站話RB5隻Idler Gear Fit FF03又唔掃. 前兩日落red star,買左隻試,fit and smooth.
星四入場試下係米真得先.  希望幫倒大家 la.

Tamiya kit Idler Gear within 1 pack batt...

                               
登錄/註冊後可看大圖

Kyosho RB5 Idler gear:

                               
登錄/註冊後可看大圖

  

RB5's idler gear is 1 teeth smaller, but it's ok since Tamiya's 27T is a bit smaller than normal.

                               
登錄/註冊後可看大圖

was running 13.5T brushless

Thanks for sharing, any test report after replacing this gear?
hk_sdu 發表於 2010-8-2 02:31

                               
登錄/註冊後可看大圖

Will have after this Thursday

hmm....問過 Ten thousand miles 冇, 跟住 Red star 就搵倒啦.  不過係上個禮拜.

回復  ewinglkw

好似話比原裝少咗一牙?
stanley_wwy 發表於 2010-8-4 16:45

                               
登錄/註冊後可看大圖

Yes ar, RB5's 26T idler gear is 1 teeth smaller than 原裝 tamiya, but it's ok since Tamiya's 27T is a bit smaller than normal.  And it will not effect gear ratio since it's an idler gear.  Internal Gear Ratio stay 2.6

yes! that is a MUST buy for FF03er

隻 Kyosho RB5 idler gear 試左,真得!  琴晚玩左成晚, 原全冇掃,好順.  (一樣都係行翻13.5T motor)

琴晚玩完影:

                               
登錄/註冊後可看大圖

回復 23# gary

有呀, 本來入TC, 點知一開車就落雨. 過左TRC.