RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
樓主: rover901
打印 上一主題 下一主題
收起左側

Tamiya CC01 project(new bumper)

  [複製鏈接]
21#
 樓主| rover901 發表於 2011-6-2 21:54:51 | 顯示全部樓層
first the front lower arm, the GPM arms look really nice:


                               
登錄/註冊後可看大圖



this one is easy, just attach it on to the "subchassis"

22#
 樓主| rover901 發表於 2011-6-2 21:58:39 | 顯示全部樓層
本帖最後由 rover901 於 2011-6-2 22:02 編輯

the steering from GPM:


                               
登錄/註冊後可看大圖


it took me a while to find out I assembled the set incorrectly.....
23#
 樓主| rover901 發表於 2011-6-2 22:01:51 | 顯示全部樓層
it took me a while to find out I assembled the set incorrectly.....

after 1.5 hours, I finally figured it out:


                               
登錄/註冊後可看大圖
24#
 樓主| rover901 發表於 2011-6-2 22:06:07 | 顯示全部樓層
then I assembled the upper arms and c hub:


                               
登錄/註冊後可看大圖


I know I know, u think the color don't match
25#
 樓主| rover901 發表於 2011-6-2 22:09:53 | 顯示全部樓層
a closer look


                               
登錄/註冊後可看大圖
26#
 樓主| rover901 發表於 2011-6-2 22:14:45 | 顯示全部樓層
and I can't use my 80mm YR shocks in the front cause the suspension mov't is very limited


                               
登錄/註冊後可看大圖


so I used the stock shocks

to be continue
27#
 樓主| rover901 發表於 2011-6-3 12:41:14 | 顯示全部樓層
euro614 發表於 2011-6-3 10:40
你唔改頭避震,成架車會頭低尾高,師兄有咩辦法去改?

The front suspension system is a dead end,unless I cut lots of chassis, and replace lots of parts, I can make the front with more travel and clearance, I will reserch and see if anyone done this before.

At the moment, I will change back to FR 70mm.....
28#
 樓主| rover901 發表於 2011-6-3 12:41:30 | 顯示全部樓層

thanks!
29#
 樓主| rover901 發表於 2011-6-4 00:41:22 | 顯示全部樓層
I finished the chassis:


                               
登錄/註冊後可看大圖
30#
 樓主| rover901 發表於 2011-6-4 00:42:06 | 顯示全部樓層
the front looks great from below


                               
登錄/註冊後可看大圖

31#
 樓主| rover901 發表於 2011-6-4 00:42:44 | 顯示全部樓層
the rear links are very well made:


                               
登錄/註冊後可看大圖

32#
 樓主| rover901 發表於 2011-6-4 00:43:29 | 顯示全部樓層
the adjustable shock mount is useful, but the yeah racig shocks with stock shock oil is too stiff:


                               
登錄/註冊後可看大圖
33#
 樓主| rover901 發表於 2011-6-4 00:59:18 | 顯示全部樓層
Almost done body:


                               
登錄/註冊後可看大圖


I was planning to match metal red with gold, like a iron man
34#
 樓主| rover901 發表於 2011-6-4 01:00:07 | 顯示全部樓層
本帖最後由 rover901 於 2011-6-4 01:01 編輯

Since I use axial 1.9 with flat iron, a bit trimming at the front is required:


                               
登錄/註冊後可看大圖


35#
 樓主| rover901 發表於 2011-6-4 01:01:46 | 顯示全部樓層
the articulation is not very impressive:


                               
登錄/註冊後可看大圖


36#
 樓主| rover901 發表於 2011-6-4 01:02:26 | 顯示全部樓層

rear is a bit better:


                               
登錄/註冊後可看大圖
37#
 樓主| rover901 發表於 2011-6-4 07:40:47 | 顯示全部樓層
All locked, front and rear
38#
 樓主| rover901 發表於 2011-6-4 21:26:45 | 顯示全部樓層
Go ahead la
39#
 樓主| rover901 發表於 2011-6-5 10:18:45 | 顯示全部樓層
Not yet mount, will do next week.
40#
 樓主| rover901 發表於 2011-6-5 10:18:47 | 顯示全部樓層
Not yet mount, will do next week.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-13 07:58 , Processed in 0.039539 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表