RGT II PRO SPEC 玩家討論區！

油壓依然系令人失望。嗰底仲系用膠。
唔系幾接受到佢用條膠條唔系用oring

oolongtea 發表於 2013-10-25 22:27
收你1700偷笑喇你！仲想金屬蓋！？
不過有埋仲好！

人係永遠貪心架啦
i hope they have option bottom cover for sell

Hm...............what can I say..........including the TurnBuckle Tuner

IBM 發表於 2013-10-25 23:53
最下面支拉杆左邊的波頭好像少了一些螺絲紋, 是不是我看錯還是另有用意?

oh yes dill.......ching really have good eye wor ......

i hope after add the 2mm spacer at the camber mount should be ok ....

KYOSH0 發表於 2013-10-26 00:02
師兄，最想知叉速如何呢？

the old version of RGT II was assemble by factory ar SUM.......and it has no problem at all for me using 4.5T
so I guess this gear diff have no problem at all

宜家開始砌啦。
大減速齒旁兩隻pulley做得幾好
冇虛位，連死光都有這虛位佢居然冇

油壓都冇難度砌起咗都幾暢順。

牙差呢....粗牙粗pin絕冇問題
搞掂。

oolongtea 發表於 2013-10-26 01:52
唔駛O ring?

no needed no leak same as the old one

RCandylau 發表於 2013-10-26 11:18
good job
希望嚴重打擊CSO & TEAM C

係囉做咩針對CSO姐，各有各嘅討論嗎

哎呀搞下搞下掛住整。唔記得同大家影相添。
基本上組裝都無乜問題。
我個人略嫌A比虛位多咗小小
金屬戒指係要自己加嘅！啲藍件睇睇下隻色水都幾好。

tsfai 發表於 2013-10-26 18:49
請問油鴨板幾mm?

2.5mm...........

erikism 發表於 2013-10-26 19:52
如果PARTS供應正常都買得過喎.........
樓主如果有時間出個JV報告就好囉.....

I am now trying hard to put the car on track tomorrow.
I ran RGT II at JV b4 .........so good handling.
So i dont think this Pro have problem

大家有冇發覺仲有個好精美嘅帶頂！！！！！！

kelvinayhh 發表於 2013-10-27 18:27
想問車上所有pulley係幾多齒

38,20

今日響佐敦谷試咗車，由於天氣太乾燥。行三十六時有D甩尾，後來用三十二。就非常好跑。
我只係用咗基本調校已經非常好走，我之前楂過2014,感覺系有點相同。

Lomomo 發表於 2013-10-28 11:15
綠黃色殼? 走姿好一般

pink and green

Lomomo 發表於 2013-10-28 11:15
綠黃色殼? 走姿好一般

which car were u driving ching ?

maxkam 發表於 2013-10-30 16:37
咦？如果手腳可以同CSO互用，即是手腳和鐡件事可以同xray互用？

metal cannot, only A arm, Chub and upright , but need to use as a set