我的一位前輩所贈的古董

根據呢位前輩車主講,部車係70's產品,佢初中既玩具,真係古董,仲早過我出世呢...

[ 本帖最後由 宏 於 2006-1-7 02:05 編輯 ]

掃下O的塵好喎~!哈!

I can do it for you , free of charge

I can do it for you , free of charge

原帖由 宏 於 2006-1-7 02:02 AM 發表
根據呢位前輩車主講,部車係70's產品,佢初中既玩具,真係古董,仲早過我出世呢...

Wah~~........the design is so simple.

"Nut and bolts + 4 wheels"  it might be a good car..donno hehe.

very simple
where is the servo mount ?? and where is the place  for battery?

快d去 ebay identify 個身份先...
順便睇下依家咩野價....

哈哈~~其實我都唔知呢架車係咩名堂...
不過設計真係好簡單,我都諗緊個sevro係應該點裝...

is it full set ?

it is toyota celica gr.b which was produced by tamiya in 1978. it is called the "pan car".the lamborghini countach is also a member of the pan car family. ur chassis has missed lots of parts, so it looks simple. u may find some of the parts on ebay.but i donno whether it can b fully restored

I have this car when I'm very young...

At that time, I (also my family) don't have enough money to buy R/C controller and battery...

But I still play it on the ground... by only pushing it... and pull it back...

I throw it away when I need removal...

but I am sure I know how to set the r/c and the place of battery...

because the car box have a colourful picture to show...

I Think that it 's not produce by Tamiya, it was produced by ASOHIMA

It missed some parts: (as much as I can remember)

1, Servo 鉄推杆

2, Battery 橡皮圈 with small holder

3, 原廠線圈變速

4, 膠天線管

I remember there is no "servo 柱" at this model.

肯定不是雙星出的車！好像是叫青木XX的...

還有另一個殼是 "領先 - 蒙地卡羅" 型越野車...

不過沒有林保堅尼殼...

thx~paulhung 兄~@.@!!~
wow....真係堅...
不過我諗而家呢架車d parts 應該幾難搵吧...畢竟佢都成30歲車齡....

1, Green area - Servo. 用雙面膠.

2, Red area - Battery. 用橡皮圈.

3, White area - Receiver + Receiver Battery (4.8v) + Servo for speed. 用雙面膠.

4, Yellow area - 原廠線圈變速

This car is fairly heavy and very RAW, too.

VERY difficult to find his parts now...

But this car can run! You can use modern 1:12 or 1:18 r/c to control it...

Be careful that the 底板 can not support too heavy r/c stuff, 底板 will "墮"...!

I believe that after cleaning , it is still a 型 r/c car...!

原帖由 paulhung 於 2006-1-8 01:08 發表
This car is fairly heavy and very RAW, too.

VERY difficult to find his parts now...

But this car can run! You can use modern 1:12 or 1:18 r/c to control it...

Be careful that the 底板 can  ...

多謝你的資料~
我諗我會先盡力番新個車殼...
之後應該都係display car了~

原帖由 barrypops 於 2006-1-8 00:30 發表
I Think that it 's not produce by Tamiya, it was produced by ASOHIMA

mayb i have made a mistake. coz tamiya produced a car similar to this one. they look the same. the only difference that i can tell was the front bumper. the part no. of the celica gr.b produced by tamiya was 5800x, u can get the info at tamiyaclub.com