RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2479|回復: 12
打印 上一主題 下一主題
收起左側

RC 10 World Car

[複製鏈接]
跳轉到指定樓層
1#
wychoy 發表於 2008-12-15 19:53:52 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
以十年無玩車,見你講得咁高興,又想玩番。
想問下而家係咪要鋰電同無刷摩打?有冇介紹用D咩?THANKS!
2#
ryancmlam 發表於 2008-12-15 21:07:00 | 只看該作者
鋰電同無刷摩打 are not a must.

In fact, as far as I know, a lot of brothers here are still using the NiMH and DC brush motor.
3#
chiuchiu 發表於 2008-12-15 22:03:33 | 只看該作者

回復 1# 的帖子

玩啦!我都係比佢毒!
係到要特別鳴謝!!!!!
minimini
tiger1
fyin

[ 本帖最後由 chiuchiu 於 2008-12-15 22:06 編輯 ]
4#
tiger1 發表於 2008-12-15 23:00:26 | 只看該作者
Chiuchiu, many thanks for your help. We are just here sharing something we all enoy a lot and a lot and a lot...
5#
ryancmlam 發表於 2008-12-15 23:17:09 | 只看該作者


I'm an RC10 lover too.  I get half dozen of RC10s
Frankie 毒 me.
6#
 樓主| wychoy 發表於 2008-12-15 23:45:49 | 只看該作者
再想問下邊度有呔賣?以前環球搬左去邊?
7#
tiger1 發表於 2008-12-16 07:46:07 | 只看該作者
rear tire is the same as any 2.2" buggy tire. I think the front tire should be common too. The challenge is to find the rear rims, front rims are screw on, so no worry
8#
fyin 發表於 2008-12-16 10:56:10 | 只看該作者
Hi All RC10 Bros,

My friend has some hex adaptor to replace for normal 1/10 buggy tires
as tamiya / kyosho etc....
So we didn't to use existing RC10 rims and its very difficult to found.
If someone interest, pls ask me.
Will post the adaptor photo later for sharing.
Thanks.
9#
tiger1 發表於 2008-12-17 01:25:51 | 只看該作者
fyin brother:

I want the adapter wor!!  
10#
fyin 發表於 2008-12-18 11:37:52 | 只看該作者
原帖由 tiger1 於 2008-12-17 01:25 發表
fyin brother:

I want the adapter wor!!  

OK Bro Tiger
11#
fyin 發表於 2008-12-19 11:37:52 | 只看該作者
Hex adaptor for replace normal hex rims buggy tries on RC10
PM me if any bro interest.
12#
gimsink 發表於 2008-12-19 15:39:31 | 只看該作者
fyin'
I am interesting but I don't know how to PM.
Can you send information to [email protected] ??
13#
fyin 發表於 2008-12-22 11:56:42 | 只看該作者
OK Bro Gimsink.
Pls. check mail
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-9 10:33 , Processed in 0.041893 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表