Losi 8ight T 2.0 超純毒品!! (攪掂晒! P.4 updated 相)

If I am ready I would like to test it in TRC too~

原帖由 smallfaifai 於 2009-2-12 00:53 發表

                               
登錄/註冊後可看大圖

果然係世紀大毒品！

有D流口水......佢係咪只有呢個砌好o既choice？有冇得自己砌o架？

另外又估唔到佢用美制批喎！尤其RC8都轉晒用公制...........

小輝,你需要露西!!!

原帖由 boogie 於 2009-2-12 19:27 發表

                               
登錄/註冊後可看大圖

小輝,你需要露西!!!

露西D parts用料好正!!

C兄賣左幾錢呀,我都好想玩呀!

原帖由 kimihotin 於 2009-2-12 20:37 發表

                               
登錄/註冊後可看大圖

C兄賣左幾錢呀,我都好想玩呀!

HK$3,1xx
I think it is a resonable price

好毒好毒.......快D裝engine試車吧！

原帖由 boogie 於 2009-2-11 23:31 發表

                               
登錄/註冊後可看大圖

joho 兄, where will you play? what engine you use?

I normally play in China, but if there are race in HK, I will for sure bring it back to race!
I have got a GRP for the 8T 2.0, havn't try it yet, but I have a race in Shanghai this weekend, will report back how's everything with bothe the truggy and the engine.

Here you go!
Such a beautiful truggy....

                               
登錄/註冊後可看大圖

http://rc-mushroom.com/product_info.php?cPath=36_322&products_id=14743

This hop-up must buy

原帖由 boogie 於 12-2-2009 09:36 PM 發表

                               
登錄/註冊後可看大圖

HK$3,1xx
I think it is a resonable price

made in ???

邊度地方砌好部車???

有冇brother知這個---"SmartDiff - The Ultimate Drop-In Hop Up "有什麼用途？
Thanks

[ 本帖最後由 simontam 於 2009-2-13 21:45 編輯 ]

原帖由 garywong5368 於 2009-2-13 21:16 發表

                               
登錄/註冊後可看大圖

made in ???

邊度地方砌好部車???

Made in Taiwan

原帖由 simontam 於 2009-2-13 21:41 發表

                               
登錄/註冊後可看大圖

有冇brother知這個---"SmartDiff - The Ultimate Drop-In Hop Up "有什麼用途？
Thanks

According to the web site:

When entering a corner off the throttle, the SmartDiff automatically opens, allowing the gears to rotate freely for improved off-power steering precision. When power is applied, the SmartDiff's adjustable ramp plates lock on to the gear shafts for increased acceleration out of corners.

我諗即係入彎更靈活,出彎反應更快. 唔知有冇兄弟用過? 不過成90蚊美金一個我諗唔係去鬥車都唔會用

真的很毒

Had my race today in Shanghai, it was freaking amazing! Although very little people play truggy today, but most important that I was able to post fastest lap time about 0.8 sec faster then the TQ Buggy, and for qualify, I was one lap faster then the TQ Buggy, which ofcause make me the TQ for the truggy class, and mind you, this is a track with a 60m stright...

The final is even better, we are running a 30 minutes final, at around 25 minutes time, I had a crash with a fellow racer, strip the servo horn on the steering (infact it just jump one teeth on the plastic), I was able to come down from the driver stand, fix the servo horn, then went back to race and still won by a 4 laps margin....

Posted the fastest out right lap time today, without even breaking any parts... This 8ight T 2.0 is simply amazing and highly recommend to anyone!

Oh one more thing, I am using a .21 GRP, not a .28... and I have all the power I am asking for to clear those jumps, again, highly recommend...

[ 本帖最後由 joho 於 2009-2-15 22:33 編輯 ]

原帖由 joho 於 2009-2-15 22:31 發表

                               
登錄/註冊後可看大圖

Had my race today in Shanghai, it was freaking amazing! Although very little people play truggy today, but most important that I was able to post fastest lap time about 0.8 sec faster then the TQ Bugg ...

So exciting, any racing photos to share with us?
After all your running, any suggestion on the option parts that need for this car?

I did not took any photo this time, but someone did, I will try to grab some and post it here.

Regarding option parts:
1) Steering servo metal horn.
2) Steering servo saver metal upper
3) Make sure you change the spring on the servo saver back to the 1.0 version, the 2.0 is way too hard.
These are all essential.

Also make sure you check the 油壓腳, all 4 of mine are bad due to the fact that when they are building them in the factory, the rotary tools they use must be too fast, and it melted the thread on the 油壓腳. I need to change them all.

I bought a arm guards for the truck however it cannot match the new 2.0 suspension arm! waste my money!

原帖由 boogie 於 2009-2-18 19:09 發表

                               
登錄/註冊後可看大圖

I bought a arm guards for the truck however it cannot match the new 2.0 suspension arm! waste my money!

Is this one??

LOSA1724

                               
登錄/註冊後可看大圖

原帖由 dicksonlai 於 2009-2-18 20:35 發表

                               
登錄/註冊後可看大圖

Is this one??

LOSA1724

                               
登錄/註冊後可看大圖

yes~