EXRUN motor

any bro using this motor? i suggested by KWS "枝出" boss. with 電變 cost $530. Tekmodel EXRUN-35A-SL

any comment? good price good deal or i got ripped off?

給以1最快交0<

原帖由 shouldbe 於 2009-2-26 02:55 發表

                               
登錄/註冊後可看大圖

給以1最快交0

i don't understand wor ching...

原帖由 chowdee 於 2009-2-26 02:48 發表

                               
登錄/註冊後可看大圖

any bro using this motor? i suggested by KWS "枝出" boss. with 電變 cost $530. Tekmodel EXRUN-35A-SL

any comment? good price good deal or i got ripped off?

it is good price for a beginner's brushless esc & motor set.

so normally for a more advance level how much would it be?

Beginner ESC Set: Brushless, sensorless ~ $5xx

Novice ESC Set: Brushless, sensored ~ $8xx to $1000

Pro ESC: Brushless sensored ~ $12xx to $17xx (ESC only)
Motor from $400 to $700

i see, thx ching!

so the one i got is it a good brand or should i choose another one instead?

原帖由 chowdee 於 2009-2-26 15:27 發表

                               
登錄/註冊後可看大圖

i see, thx ching!

so the one i got is it a good brand or should i choose another one instead?

Hobbywing is a China brand.  They make ESC's for planes, boats and cars.
For about $500, it is very good value!
I bought one set for 8 months, no problems so far.
Only the on/off switch and the fan broke, but both can be replaced.

But of course, if you have a bigger budget, you should get a better ESC.

What kind of car are you playing?  touring or buggy?

原帖由 chowdee 於 2009-2-26 03:12 發表

                               
登錄/註冊後可看大圖

i don't understand wor ching...

sorry,我部腦有問題
只實我只係想話呢個價呢set電子品低用,早前賣成6佰幾銀,我就中招了

原帖由 shouldbe 於 26-2-2009 17:41 發表

                               
登錄/註冊後可看大圖

sorry,我部腦有問題
只實我只係想話呢個價呢set電子品低用,早前賣成6佰幾銀,我就中招了

of course, market price reduce cause new ESC is coming.

原帖由 EG4MAN 於 2009-2-26 18:22 發表

                               
登錄/註冊後可看大圖

of course, market price reduce cause new ESC is coming.

electronics is like this.  before plasma 42" tv costs over $50000, now only $20000!

原帖由 hardmankam 於 2009-2-26 17:24 發表

                               
登錄/註冊後可看大圖

What kind of car are you playing?  touring or buggy?

oh ching, i'm playing TT01 type E. a beginner. all items were introduced by 枝出 boss. talkative guy...but still not sure if i got ripped off or not....

i still need to get a servo ar...which one is good (value and quality) for a beginner? i got 2PL AM now...

Hobbywing 35A + 13T/9T is good value. This is a good set for TT01.
Don't worry, you didn't get ripped off.

For servo, it all depends on your budget too.
beginner: ~ $100
novice: ~ $300
pro: > $500

For good value, you can look into taiwanese brands.

such as? also which shop got the best price? i dun mind going for novice level....coz i know i'm gonna get poisoned soon so probably will upgrade the car instead of parts for TT01...is that a right decision?

if you think u will get poison, its best to get something pass the beginner's stage to save $.  here are my suggestions:

Car Kit: New TA05 or a used TRF415 ~ $1200to$1600
ESC + Motor: sensored, ESC can handle about 5.5T, probably 60A unit. ~ $800
Servo: Futaba 9551 ~$550
Controller: Spektrum DX3S is a very good buy for 2.4G. ~$1600
Lipo + Charger ~$500

total around: ~$5000

For the best price, you really have to shop around KWS.
But the shop you mentioned in your 1st post has pretty good price.

damn $5k....shiit. i already got some rookie shiit here......well my car still not built up yet, since missing servo...

at this stage i think i should just finish my car and get some grip on this rookie car first....then jump to your suggested level.....

thanks a lot for all these details.....

but for those ESC, servo controller, etc can be reuse for other car or RC toys...so for long term is a good investment...

after you start playing rc as a hobby, $100 is peanuts! haha

for servo, get the futaba/sanwa/ko.  you can use these for many years!

i also suggest that even if you are starting on tt01... try NOT to upgrade too much on this chassis since it is still a beginner's line.  

next in line, you really should look into a good 2nd hand professional level car like:
HB Cyclone
Tamiya TRF415/TRF416
Xray T2'008/009

of course, buying new is even better if you have budget.