有冇師兄用緊x-605差機?

琴晚係kws買左一部
返屋企試下差電果陣
發覺差滿左好似係不會自動cut 和 響的...
而我舊電就滾左半個幾鐘先cool down下來
小弟係用3.5A充的...

部機好似無得睇舊電既電量,只係睇差機輸入了多少,對嗎?
咁我點先知差滿呢??
現時部機既setting係 : discharge 9.0V

i use lipo, just select to lipo and hold start button will start charging.

when it's full will beep and ask u to stop or auto stop ga la wor...

用セ電？Lipo or Nimh？Lipo唔應該熱。有冇揀錯mode？

i use Lipo but the machine will get hot too.......not boiling hot tho..

原帖由 chowdee 於 2009-3-2 11:13 發表

                               
登錄/註冊後可看大圖

i use Lipo but the machine will get hot too.......not boiling hot tho..

It's normal if it isn't too hot.

師兄會唔係你差li-po時無用balance模式同埋無插好兩條線?

對不住各位,我冇講清楚
當時我係差緊NI-MH 4200電
差機上肯定已set好ni-mh batt !

should have auto cut ga wor...but i usually choose fast charge lor....

fast charge have autocut??

any c-hing tell me how to set NiMH Auto Mode? my X-605 just to show Manual Mode

你可以係nihm mode時同時接 mode 同 start制 (以前好似係咁set)

p.s.請問你地用唔用個條有2個鱷魚鉗既12v入電線, 我想收一條呀....有意就pm我啦, 謝謝

解決了...
原來真係會auto cut...
我一路唔理佢由得佢差,結果bbb咁響...thx all c hing