請教M03M 轉彎時好似冇動力咁....

唔知點解轉彎時,明明比住油,部車都係好似冇動力咁....(係明顯地比直路慢左一半)
想知係正常定係有D咩問題...
全原裝,咩都冇改,只係差速用左藍色樽仔,灰色果隻油.

use ball differential with high presure !

原帖由 terencelyl7411 於 2009-3-1 18:44 發表

                               
登錄/註冊後可看大圖

use ball differential with high presure !

如果唔想換野呢....
其實呢個問題係正常定係唔正常現象....?

Use better tire (such as Ride, RJ, not Tamiya option tire) and you will see the difference.

原帖由 Rcrounder 於 2009-3-1 19:11 發表

                               
登錄/註冊後可看大圖

Use better tire (such as Ride, RJ, not Tamiya option tire) and you will see the difference.

我用緊RP 前40 後24...

覺得是個差速太松拉。

原帖由 <i>飛雞</i> 於 2009-3-1 06:59 PM 發表 <a href="http://bbs.rc-evo.com/redirect.php?goto=findpost&pid=1139484&ptid=114219" target="_blank"><img src="http://bbs.rc-evo.com/images/common/back.gif" border="0"   alt="" /></a><br />

<br />
如果唔想換野呢....<br />
其實呢個問題係正常定係唔正常現象....?

<br />
apply more AW grease !

原帖由 飛雞 於 2009-3-1 19:21 發表

                               
登錄/註冊後可看大圖

我用緊RP 前40 後24...

Swap them and try. Front 36 or 32 should be enough and rear 36 or 40 is better.

原帖由 Rcrounder 於 2009-3-1 19:43 發表

                               
登錄/註冊後可看大圖

Swap them and try. Front 36 or 32 should be enough and rear 36 or 40 is better.

即係呢個問題係閞條呔事??

原帖由 飛雞 於 2009-3-1 18:59 發表

                               
登錄/註冊後可看大圖

如果唔想換野呢....
其實呢個問題係正常定係唔正常現象....?

Yes, it is 正常現象. It is front wheel drive and it would loss more speed than 4WD during turn. Changing tires, differential, etc. help to loss less speed.

原帖由 louis-wei 於 2009-3-1 19:24 發表

                               
登錄/註冊後可看大圖

覺得是個差速太松拉。

鬆就應該唔會.因為我都扭得幾實.....

原帖由 terencelyl7411 於 2009-3-1 19:33 發表

                               
登錄/註冊後可看大圖

apply more AW grease !

我試下落多d睇下怕唔怕係咁先....

原帖由 Rcrounder 於 2009-3-1 19:46 發表

                               
登錄/註冊後可看大圖

Yes, it is 正常現象. It is front wheel drive and it would loss more speed than 4WD during turn. Changing tires, differential, etc. help to loss less speed.

明白...我仲以為我部車有問題tim....嚇死~
唔該師兄們~

tight up the diff. as much as u can.( use one more 9mm washer over the existing one inside the diff.) it will help, but I just change a 3Racing ball diff. big different! still remember to tight it up all the way,

原帖由 teamcsimon 於 2009-3-1 13:37 發表

                               
登錄/註冊後可看大圖

tight up the diff. as much as u can.( use one more 9mm washer over the existing one inside the diff.) it will help, but I just change a 3Racing ball diff. big different! still remember to tight it up  ...

C Hing, you mean 3Racing ball diff is better?

原帖由 teamcsimon 於 2009-3-2 05:37 發表

                               
登錄/註冊後可看大圖

tight up the diff. as much as u can.( use one more 9mm washer over the existing one inside the diff.) it will help, but I just change a 3Racing ball diff. big different! still remember to tight it up  ...

3 racing ball diff for m03 = s h i t
must not buy item

原帖由 飛雞 於 2009-3-1 19:21 發表

                               
登錄/註冊後可看大圖

我用緊RP 前40 後24...

你試車都唔找我呀..   不過我都不時cut車呀...