Gen-X 10 Pro Graphite Kit (World GT)

I CANT FIND IT IN KWS

JUST ORDER FORM US
1 x 1710 - Gen-X 10 Pro Graphite Kit (World GT)
1 x World GT Spec Tire - Front
1 x World GT Spec Tire - Rear
2 x Sophia GT 200mm World GT Body

ANY BOTHER KNOW CAN I USE 3.5MOTOR?
AND WHITCH SERVO GOOD FOR THIS CAR....

It should available in KWS for the kit, front and rear tire.  GO to cat shop to have a check.  I bought mine a months agaon and 2 set of tire.  
You can use all 200mm shell, and I use HPI's BMW M3 in TRC.  However, it roll over much, it should be my setting problem...ke..ke...
I use SP's 10.5 R.  close to 23 T.  It is very slow in TRC...I almost sleep.....ke..ke...
Not use for 3.5r.....
Normal 12 son servo nequire, and not full size allowed.
Also, you need this http://www.teamcrc.com/crc/modul ... &prodID=7719034  to reduce the rollover....  and this for 235mm body.  ~400 HKD in CatShop
http://www.teamcrc.com/crc/modul ... &prodID=7719021

thx bother that think i bought it too..thx...
so u say only can use 12son servo....means i only can use 9650?
cant use 9551? or any good servo i can use?
so what motor  is good for this car....
i got ko esc
3.5t/9t/17.5t/

No sure for servo, at least I tried to mount a 9650, but it is too big.  THen I mount a very aged 12 sone servo, it is OK.  So, just mount and use it.
FOr motor, what I tried so far is SP 's 11.5.  and Novak XBR SC, no top speed indeed.  I do believe it could handle 5.5 or even 3.5.  
But the kit's spring (front and side) is too soft for high tracking track like TRC.  RollOver very easy even if setup to 4mm front and rear.  And make my BMW shell damage.....
Be ware the kit's screw, the look great but very easy to damage by screw driver, as they are very SOFT.

HAHA!~THXS I WILL BEWARE ABOUT THE SCREW!~
EVEN 9650 WILL TOO BIG......

I find that i must set the throttle curve for very gentle acceleration at initial or otherwise it will too easy to spin when exit corner. I am using SP 3.5R. May be that is too powerful for it?

ANd how the front stiffner can help on the handling? Please let me know more before I buy it. thanks!

And agree that the screw is too soft....

And EDI, where you order your kit from? US Website directly? Can you share?

原帖由 henryb4sun 於 2009-3-22 21:36 發表

                               
登錄/註冊後可看大圖

And EDI, where you order your kit from? US Website directly? Can you share?

OK... I ORDER FROM http://www.nexusracing.com/index.php AND http://www.teamcrc.com/crc/index.php
BUT NEXUSRACING IS CHEAPER THAN CRC,,,BUT CRC HAVE ALL STOCK,,,I JUST BOUGHT 2SET GT TIRES FORM CRC...
I WILL PUT 3.5MOTOR TOO..BUT WHAT PINION GEAR U USE?

AND WHAT IS THE DIFFERENT ABOUT 1/10 TOURING AND 1/10 WORLD GT?

The front stiffner, in theory, make the front suspenson structure more rigid.  And making more push head.  Effective as if using harder spring.  And more strong front structure.
To me, it really make more push and easier to drive.  But I change several setup together so, how much it controbute on "push"  not sure.
Your spining issus happen in my 12 son.  Need to drive very gental when exit corner, when I use 6.5R on it.

EDI, I am using Speed Passion Sensored 5.5T motor and 26t spinion gear.

I also use front red spring and rear white spring. However I am new comer and still play on street (Yuen Long Wan Chow). It is simply too easy to spin. May be I should buy a 23t to try.

Basically I am setting up the car with the menu. Any recommendation on car height, front camber and toe in and caster?

I also don't know what is the difference between 1/10 touring and World GT.

and....one more thing...u guys use 4cell or 5cell? or lipo?

1:10 Touring, 4 wheel drive.  World GT, rear drive.   Corret me if I am wrong.
Playing on street is not good for the car.  Go to track... such direct driver model is waste the car ah, if playing on street.  There are too dirty for them.  
And I use Lipo for playing this on TRC

原帖由 EDI 於 2009-3-22 22:09 發表

                               
登錄/註冊後可看大圖

AND WHAT IS THE DIFFERENT ABOUT 1/10 TOURING AND 1/10 WORLD GT?

defenition from IFMAR that 1:10 touring(ISTC) would be:
overall width : 190mm max.
both 2wd/4wd is allowed.
direct driving system is not allowed.
tire width max. 24mm and 64 mm dia. max. Rubber tire only.
in general the body shell only real car with 4 door.

for 1:10 GT world, not yet recognize by IFMAR, now it still under a so called "funny purpose" category, but the defenition would be:
overall width : 200mm max.
direct drive system only now.
sponge tire and the size similar to 1:10 pan car.
the body shell, as the category implied, only GT world.
4 cells sub-C size battery only.


The above may wrong/missing, pls. correct me.

No sure for servo, at least I tried to mount a 9650, but it is too big.  THen I mount a very aged 12 sone servo, it is OK.  So, just mount and use it.
FOr motor, what I tried so far is SP 's 11.5.  a ...
benz1850 發表於 2009-3-22 16:27

                               
登錄/註冊後可看大圖

hey bother BENZ1850!~ i just go kws today...they say the car can use even9551 servo woo....not use 1/12 servo woo

Cat shop?  Hope those gal true.  I just mout my 9550 and I can't to that, I am disappointed as I want to use it for it's shorter in size.  As it is too wide.  I hope I am wrond la, so that you could save $$$ for tire, for palying together later.

no cat a~! i only go x全 ...they say use standard size woo...i still waiting my car....

Hi EDI,

I want to use 9451 before but that is too tall.

So I use 9650 now. Size is perfect for GenX10.

Henry

heee!~ no time today..will do it tomorrow night

You bought 2 bumpers?  Remember those beautiful red Al screw are all SOFT....be careful!!!