雙星入門無刷電變的問題

請問有人知道雙星入門無刷電變支援 Lipo Cut-off 嗎?

   Tamiya Brushless ESC 01 TBLE-01

另外有用過既師兄可以分享用後意見嗎? 謝謝指教!

I have this set, seems ok.

http://www.tamiya.com/english/products/45039brushless/index.htm

個 spec. 無話支援 LI-PO 喎!

Tamiya Brushless ESC 01 TBLE-01
Item No：45038　

Tamiya Brushless ESC (Electronic Speed Controller) TBLE-01 is designed for use with Tamiya Brushless Motors (TBLM Series). In addition to the 5 pre-set profiles, settings such as brake and neutral brake can be set separately. Along with its high performance, it also features 3 protection systems: overheating, overloading, and low voltage. Compatible with Ni-Cd, Ni-MH, and Tamiya Li-Fe batteries.

【 Specifications 】　Max. Continuous Current: 100A, Input Voltage: 6.6-7.2V, Drive Frequency: 16KHz, Dimensions: 47×30×31mm, Weight: 80g (excluding cables)

有low voltage cut就得la
li-po最怕過放姐

有low voltage cut就得la
li-po最怕過放姐
edmondhk 發表於 2009-3-28 00:58

                               
登錄/註冊後可看大圖

我都覺得係!  
可能 孖星無出 LI-PO, 所以唔寫 !

但係個cutoff會唔會只係可以set每cell0.9v或者完全冇得set,好似隻tc spec冇得set 幾多 cutoff?
另外如果有高人知道tc spec點set cutoff就賜教小弟啦.

雙星入門無刷電變係 有感 or 無感?