TA03R的重生+TA02翻生+TB01再現！！！

個人都喜歡雙星車，零件呢樣野事在人為，不過愛黎收藏比較多，雖然唔係話好經典型號，不過喜歡就得。

your car have a lot of option part, but it is a old one, buy a new model
platolau 發表於 2009-6-18 20:07

                               
登錄/註冊後可看大圖

都只係個人收藏，無所謂新款舊款，佢哋每架都各有特式同優點，有時新model未必好過舊model，我玩車主要玩每架車的特性，自己手指唔好，所以唔係鬥快，仲有現今啲新model其實架架都係差唔多同樣設計，所以無乜衝動去玩啲新款車。

have a question, how to set the TA03 height?
i find the height of my car is too low. always crash the body chassis & bottom part of the damper.
do i need to buy some option parts to do that?
thx

d 車好新淨 wo

have a question, how to set the TA03 height?
i find the height of my car is too low. always crash the body chassis & bottom part of the damper.
do i need to buy some option parts to do that?
thx
lmanhon 發表於 2009-6-19 00:18

                               
登錄/註冊後可看大圖

Normally, orignal TA03‘s ride height was too high for racing. My cars were set to 4mm to 5mm height from the bottom to the ground. Somehow, they got crash on the chassis bottom but it gave well handling according to lower CG. Please give more info or photo about your car such as what kind for damper, damper oil, spring or weight.

Those are my TA03s details as below:

TA03R
Tamiya Alu. damper with 3 o-ring low down ride height.
Asso 80 watt damper oil (front & rear).
TRF bule shot spring (front & rear).
1480g car weight.

TA03F TRF
Tamiya Alu. damper with 3 o-ring low down ride height.
Asso 80 watt damper oil for rear, 60 watt for front.
TRF yellow short spring for rear, blue spring for rear.
1470g car weight.