EX-1 MARS的一個小問題

點樣可以RESET支控or delete哂D setting?

Straight from the manual;

Return to factory setting;
1. After switching the power on, enter the system mode from the initial screen.
2. Press the Up key to enter Memory Recall screen.
3. Press the Select key to enter the Memory reset screen.
4. Press - and + together and this will set back to factory setting.

Hope that helps!

thx of your help!

You're welcomed. The EX 1 is about the most complicated transmitter to use in the history of RC anyway. Good thing I found an old manual recently!!