heatsink connection

all ching help, how to connect heatsink fan top ESC ? ESC has no plug for this...

登錄/註冊後可看大圖

我插左係接收

all ching help, how to connect heatsink fan top ESC ? ESC has no plug for this...
292060
gimsink 發表於 16/8/2009 09:23

                               
登錄/註冊後可看大圖

自已係電變正負極焊多條線咪得law...........
唔識的話就直接插落接收....

自已係電變正負極焊多條線咪得law...........
唔識的話就直接插落接收....
lung1 發表於 2009-8-16 09:38

                               
登錄/註冊後可看大圖

係ESC出同接收出會唔會爭好遠?

係ESC出同接收出會唔會爭好遠?
Noir.KAZE 發表於 16/8/2009 09:46

                               
登錄/註冊後可看大圖

你話呢~ 電就7.2/7.4v,接收得5v....

ching
BL ESC three o/p wirs, I think cannot connect to fan. So do you mean plug into the receiver 3rd channel ?  I  also have brushed ESC, if connect to o/p, then it is in parallel with the motor, will it affect the motor speed ?

ching
BL ESC three o/p wirs, I think cannot connect to fan. So do you mean plug into the receiver 3rd channel ?  I  also have brushed ESC, if connect to o/p, then it is in parallel with the motor, wi ...
gimsink 發表於 16/8/2009 10:43

                               
登錄/註冊後可看大圖

係駁落電變電既正負極先岩................並唔係魔打既正負極..............

即係電池入電變嗰邊呀...

if connect to o/p, then it is in parallel with the motor, will it affect the motor speed
gimsink 發表於 2009-8-16 10:43 AM

                               
登錄/註冊後可看大圖

what's the consumption of the fun?

in fact, if u are worrying the performance when connection the fan
u should also consider the extra weight and balance of the fan after installation

dont made thing go complicated, take it easy la
as your fan on heat sink is only a 3R product

電變冇位插落接收穩陣D，駁電池輸入電變位始終冇咁理想，如果處理唔好，short咗就麻煩...

move7648 ching, I connect the fan just to give some cooling to prevent overheat, I just play for fun, weight + balance etc..not my concern.
what do you mean by "only 3R product?", I didn't make things complicated, just want to get a very simple solution to connect a fan.

wingwing ching, thanks advice, I will follow your instruction.

我直接落少少錫焊落枝接收枝針到再包膠

千其唔好咁裝, D 靚FAN 一SHOT就燒!
買個接收插十幾蚊(KO) http://bbs.rc-evo.com/forumdisplay.php?fid=82&page=1
一努永日, 同埋千其唔好貪方便在電變FAN 位取電,是會JAM機的!

我直接落少少錫焊落枝接收枝針到再包膠
Alcohol 發表於 16/8/2009 23:17

                               
登錄/註冊後可看大圖

好心整個插啦.................安全好多....