名位買左e-revo 無刷 的 C-hing, HELP!!!

本人想買 e-revo 無刷, 想問下名位 C-hing, Which battery is the best, because i want to play 6S, which charger is good, do i need any hop-up parts as well?

Please HELP!!!

Hyperion charger+ SMC 50C Li-Po, Traxxas D車要襟趙好行, 大把野要改, 起碼cvd改金屬, d servo換埋佢

As a player of e-revo, my opinion is to change the skid plates of chasis to have better protection.  I also just changed the CVD and the center shaft to metal version ( just for better look...^_^), actually i found that the original plastic CVD and center shaft have no any damage even i played the car nearly one year (It is a bit out of my expectation).  I did not change other things and feel that the car is quite easy to control even using original setting....my requirement may be too low..haha.

師兄你好! 我玩左emaxx 一年多了! 同意powis兄說法個人認為e-revo 買返黎一定要換既係金屬skidplate !其他野暫時無爛就無咩好改!!  電我地用緊intellect 30-40C 都好夠玩! 原裝膠萬向方面我地有6-7個車友用5.5 用4.5R (emaxx/e-revo)玩左成年都未爛(睇睇下圖), 原裝膠萬向o係Rcmart 賣緊HK$40 好抵玩爛左買返膠既抵玩d ! 俾d資料你睇睇! 得閒一齊玩!


EMAXX/ E-revo/ Summit 技術交流區, 歡迎大家貼你既Monster Truck
http://bbs.rc-evo.com/viewthread.php?tid=141830

Traxxas Emaxx , E-revo, Summit 片段
http://www.youtube.com/watch?v=8gP9gT0aKH0
http://www.youtube.com/watch?v=HNjd27d4aLE
http://www.youtube.com/watch?v=V9cb8ipZgJs

Traxxas Summit 介紹http://bbs.rc-evo.com/viewthread ... &extra=page%3D1

越野大腳比較及介紹 Emaxx/E-revo/ Savage Flux
http://bbs.rc-evo.com/viewthread ... &extra=page%3D1

Emaxx交流區
http://bbs.rc-evo.com/viewthread.php?tid=92596&extra=page%3D1

E-maxx/E-Revo/Summit 暴力跳台操車片段分享區
http://bbs.rc-evo.com/viewthread.php?tid=125899

charger 呢部唔錯! 一次差4舊電, KWS 賣8xx

                               
登錄/註冊後可看大圖

As a player of e-revo, my opinion is to change the skid plates of chasis to have better protection.  I also just changed the CVD and the center shaft to metal version ( just for better look...^_^), ac ...
powis 發表於 2009-12-1 12:33

                               
登錄/註冊後可看大圖

Totally Agree! many of our friends play erevo didn't change CVD as well and last over an year for playing.

charger 呢部唔錯! 一次差4舊電, KWS 賣8xx

                               
登錄/註冊後可看大圖

tatame 發表於 2009-12-1 13:34

                               
登錄/註冊後可看大圖

But it need at least 30A power supply >.<

But it need at least 30A power supply >.
kingman7788 發表於 2009-12-1 13:39

                               
登錄/註冊後可看大圖

買隻30A牛la !! $2xx 抵!

金屬cvd我都買左, 但後來發現自已七左, 因為金屬cvd勁貴而且條原裝膠cvd比我瘋狂喪玩左成大半年都冇事, 我計過一盒金屬cvd既價錢夠我買＋幾條原裝膠cvd, 分分鍾玩到架車唔要都未用得哂~~~~~

樓主如果唔理會轉動既twist的話, 係唔須要換金屬cvd架, 始終玩車人人要求唔同, 有d人要玩到真正性能同提昇圈速, 有d人求其行到唔爛就夠.............我見樓主又要best battery, 又要玩6s, 我既建議適唔適合你自己諗啦

Anyway la, if no budget limit on 樓主, you can consider to buy metal version of skid plates, all CVDs, new set of wheel and tire...

thank you 名位 C-hing, RCmart no stock ar, anyone know where can i get it except rcmart? also for the cvd, servo, etc.... can i buy in KWS, or do i need to buy from rcmart?

To ftbingobingo : is the model number EOS0606i for  Hyperion? i only got imaxB5, is this ok to charge SMC 50C Li-Po? how many C to charge it? is this 3S?

To tatame :The imax quattro B6 is really good, 30A牛, sigh, i got a 12.5A ouput.

To powis : For the tires, i heard someone said hpi phatline is good, have u use it?

                               
登錄/註冊後可看大圖

CVD?

thank you 名位 C-hing, RCmart no stock ar, anyone know where can i get it except rcmart? also for the cvd, servo, etc.... can i buy in KWS, or do i need to buy from rcmart?

To ftbingobingo : is the ...
number4 發表於 2009-12-1 21:46

                               
登錄/註冊後可看大圖

If you've got B6, no need to buy EOS0606i as they are similar (both can support 6S) but EOS0606i can use AC power source. You can use 5A to charge SMC, they are 2S packs. You may consider 720 or 615 for higher performance.

For parts, you can go Jet Hobby to look for them. For servos, any shops in KWS can help you. I would suggest a single  Hi-Tec 7955 instead of the original crap servos

BTW, if you want to fit 3S cell into the batt compartment, I think the highest "C" you can fit is 25-30C, I don't think that is good enough for such high current/voltage, the batt may swell easily........ for sure someone may say, "I have been playing for a year long and there is no problem (they are always saying that to show they are "experienced" and "professional")", I would say this is the matter of standard you demand. That's why I suggest you use SMC 40-50C Li-Po, although  they are in 2S packs, you can still enjoy  6S by doing simple modifications to fit the batt, or just 4S with higher power motor is good enough

我都係用緊4s玩e-revo,我亦買左Ｄoption parts都未換(包括金屬cvd),但原裝條toe links(5338),我就斷過3條..依家換哂5338R(7075-T6)

換哂5338R

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

請問邊間鋪有得買及幾多錢?
唔該晒!
有冇用緊 E-REVO TWO-SPEED CONVERSION KIT (Part #5692)

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

一買車就叫人改CVD 好驚! 唔係乜都買晒頂級option 晒就一定好走! 樓主玩過架車有實際須要先, 咁樣慳唔小錢架或者問下d玩過既人啦，當然有好多$ 可以一買返黎就改晒架車咩都買晒最好! 因為唔洗用腦諗邊d真係須要改邊d唔須要改, 我就比較buy 玩過既人既意見!

金屬cvd我都買左, 但後來發現自已七左, 因為金屬cvd勁貴而且條原裝膠cvd比我瘋狂喪玩左成大半年都冇事, 我計過一盒金屬cvd既價錢夠我買＋幾條原裝膠cvd, 分分鍾玩到架車唔要都未用得哂~~~~~
tm0212 發表於 2009-12-1 15:10

                               
登錄/註冊後可看大圖

都係七架!! 我又係一買車就買左金屬CVD ! 都玩左成年了條野都未爛, 點算

HAHAHHAA~~~Again~~